Amigurumi Plush Puppy Free Pattern
Plush puppy in shorts
Necessary materials:
• yarn Adelia “SOFIA” 100% polyester, 50gr/90m (brown and beige) can be replaced with a similar yarn;
• yarn “Children’s novelty” black for the nose, or equivalent;
• strong threads of appropriate colors for stitching details, for example, iris;
• a hook of the appropriate size (in my case, I used No. 3 for the body and No. 2 for the nose, No. 1.75 for the eyes);
• filler;
• plastic eyes;
• wire for handles and legs;
• cotter pins (optional);
• glue (if needed);
• needle for stitching details;
• pins for marking;
Abbreviations
• ch – lifting air loop
• MR – amigurumi ring
• sl-st – connecting post
• sc – single crochet
• DC – double crochet
• HDC – double crochet
• inc – increase
• dec – decrease
does not contain training materials, the markers go straight from the place of designation, upwards, if necessary, make offset loops.
Head
Stuff the part in the course of knitting.
1-6sc in MR
2-6inc (12)
3- (1sc, inc) x6 (18)
4- (2sc, inc) x6 (24)
5- (3sc, inc) x6 (30)
6- (4sc, inc) x6 (36)
7- (5sc, inc) x6 (42)
8- (6sc, inc) x6 (48)
9-17-48sc
18- (6sc, dec) x6 (42)
19- (5sc, dec) x6 (36)
20- (4sc, dec) x6 (30)
21- (3sc, dec) x6 (24)
22- (2sc, dec) x6 (18)
23- (1sc, dec) x6 (12)
24-6dec
pull the hole, hide the thread
BODY
Side marker.
1-6sc in MR
2-6inc (12)
3- (1sc, inc) x6 (18)
4- (2sc, inc) x6 (24)
5- (3sc, inc) x6 (30)
6- (4sc, inc) x6 (36)
7- (5sc, inc) x6 (42)
8- 10- 42sc (3 rows)
11- (1sc, dec) x6 (36)
12-13-36sc
14- (4sc, dec) x6 (30)
15-16-30sc
17- (3sc, dec) x6 (24)
18-24-24sc
25- (2sc, dec) x6 (18)
26- (1sc, dec) x6 (12)
Leave the thread for sewing.
Front paws
We start with a brown thread
1-6sc in MR
2-6inc (12)
3-7-12sc
Change thread to light
8-12sc
9- (4sc, dec) x2 (10)
10-14-10sc
15- (3sc, dec) x2 (8)
16-18-8sc
Finish row sl-st, leave thread for sewing
back paws
Foot:
We knit with a brown thread, a marker on the side.
Decreases on the sides, you should follow the symmetry.
1-6sc in MR
2-6inc (12)
3- (1sc, inc) x6 (18)
4- (2sc, inc) x6 (24)
5-7-24sc
8- (10sc, dec) x2 (22)
9- (9sc, dec) x2 (20)
10-11-20sc
12- (8sc, dec) x2 (18)
13-18sc
14- (7sc, dec) x2 (16)
15- 2sc, 3ch, 3sc skip, 11sc
(the hole should come out at the top in the middle)
Fill not very tightly to seamlessly insert the wire in the future.
16- (6sc, dec) x2 (14)
17- (5sc, dec) x2 (12)
18-6dec, pull off the loops, hide the thread.
Main leg:
We attach a light thread to the side of the hole, on the right.
Side marker.
Dial over hole 8sc
1-8sc
2- (inc, 3sc) x2 (10)
3-5-10sc
6- (inc, 4sc) x2 (12)
7-1sc, 4inc, 7sc (16)
8- 1sc, (inc, 1sc) x4, 7sc (20)
9-13-20sc
14- 3sc, 2dec, 13sc (18)
Measure the wire, the length should also take into account the foot, plus do not forget about the bends at the ends.
Wrap the wire with adhesive tape.
Stuff moderately tight.
15- (1sc, dec) x6 (12)
16-6dec
Pull off the loops, cut the thread and hide.
Muzzle
We knit with brown thread.
Dial 5 ch, start with second ch
1- 4sc, 3sc in 1, 3sc, inc (12)
2-inc, 3sc, 3inc, 3sc, 2inc (18)
3- 1sc, inc, 3sc, (1sc, inc) x3, 3sc, (1sc, inc) x2 (24)
4- 2sc, inc, 3sc, (2sc, inc) x3, 3sc, (2sc, inc) x2 (30)
5-8-30sc
Fold the muzzle in half, with threads on the sides
Make extra markers.
Knit 5sl-st (+1sl-st if necessary for symmetry)
9-ch, 5sc, turn
10- 3ch, 5DC, turn
11- 3ch, 5DC, turn
12- 3ch, 1dec DC, 1DC, 1dec DC (3)
13- 3ch, 3DC together
Leave the thread for sewing.
*Note: if the muzzle is not knitted from textured, or fluffy yarn, or yarn that cannot be combed, then it is better to knit not DC, but sc, before decreasing, make 3 additional rows. It is also desirable to tie the muzzle sc in a circle.
Ears
1-3ch
2-2inc (4)
4-inc, 2sc, inc (6)
5-inc, 4sc, inc (8)
6-17-8sc
18-dec, 4sc, dec (6)
19-20-6sc
21-dec, 2sc, dec (4)
22-25-4sc
Attach a wire for beads and tie the ears in a circle, fasten the thread, leave the end for sewing.
Nose
1- with a black thread, dial a chain of 7 ch, then knit with the 2nd ch
2- 4sc, 3sc to 1, 3sc, inc (12)
3-inc, 3sc, 3inc, 3sc, 2inc (18)
4-6-18sc
Leave thread for sewing
Eyes
white thread
1-7sc in MR, don’t overtighten the ring.
2- 1sl-st, 1inc sc, 1inc HDC, 1inc DC, 1inc HDC, 1inc sc, 1sl-st
Fasten the thread, cut.
Attach a brown, not thick thread, for example, Iris.
3- 2 sc in each loop
Leave the thread for sewing.
Insert the eye into the MR, secure it on the back with a washer.
Assembly
We sew the head so that the belly is in front in the middle.
Next, we insert the wire for the handles through the body, measure the desired length, taking into account the fact that there will be bends at the ends, they need to be wrapped with adhesive tape. Stuff the handles not tightly, sew.
Attach the muzzle, pin it to the head with pins, stuff it not very tightly to make it easy to make tightenings, sew on. Next, try on the ears, you can vary their location, as soon as the result suits, we hide the ends of the wire in the head and sew. We sew the legs, I used the thread fastening method.
Next, with a strong thread, we make tightenings on the muzzle. For convenience, we mark the places of the tightening with pins.
We fix the thread at point 1, bring the needle out at point 2, make a stitch and return to point 1, if necessary, repeat, fasten.
The next tightening over the muzzle, fasten the thread at point 4, then insert the needle at point 3, and bring it out at point 4, repeat, then from point 4 we make a stitch to point 5, repeat; then from point 4 to point 6, repeat, fasten and hide the thread.
If necessary, you need to comb our
Puppy.
Sew eyes and a nose, you can also glue a plastic nose.
Make a few stitches with a contrasting thread above the eyes, these will be the eyebrows.
It remains to make the tightening on the paws. With external stitches, select three fingers.
Shorts
Cast on 30 sts on needles. Each row begins and ends with a hem loop.
The canvas is double-sided, i.e. There will be a front and back side.
1-3 gum 1×1
4- (1inc, 1purl) x28 (58)
5-14-58p.
Knit two such parts, then distribute them on three knitting needles, knit on the front side.
Distribute 38/39/39
16-30-116p
31- (2 purl., dec) x29 (87)
32- (9purl., dec) x7, 10 purl. (80)
33- (8purl, dec) x8 (72)
34-41 rubber band 1×1 (72)
Sew the bottom of the pants.
For straps, we collect a chain of air loops of the desired length, knit 2 rows of sc, at one end make a loop of several air loops suitable for the selected button, fasten and hide the thread, sew the opposite end to the back of the shorts. Sew a button on the front.
