From his rosy cheeks to his cozy scarf and hat, this charming snowman is sure to warm hearts wherever he goes. So grab your crochet hook and get ready to bring a little winter magic into your home with this delightful amigurumi pattern!

Necessary materials :

• We take yarn depending on what size you want to knit a toy:

• Colors of yarn: brown, white, orange, brown, green, etc. Gray.

• Threads “iris” for decoration (black)

• black buttons 3 mm

• 2 green buttons for panties.

• Hook No. 1.50 (1.25)

• Plastic and gypsy needle (for registration)

• Filler for toys (synthetic fluff or holofiber).

• Eyes No. 5 (2) + some white felt

• Wire, (chenille wire) wire cutters

• Glue (crystal – moment)

Abbreviations

MR – amigurumi ring

SC – single crochet

DC – snack column

İNC – increase

DEC – decrease

CH – air loop

FLO – front floor eyelet

BLO – rear floor eyelet

We knit the whole body together, without sewing.

As we knit, fill with filler.

Manufacturers – hands (in red)

1.5 MR

2.5×2 (10)

3. (10)

4.3 SC., 3 DC in one loop with one vertex, 6 SC. (thumb)

5. SC. kill 2 SC. DEC. SC. DEC. (7)

6. For BLO. (brown) (white piping

SC. – for FLO. )

7. – 13. (7)

Tighten thread trim

Legs – Brown:

4 CH.

1.2 SC. (3 SC in one loop) SC., İNC.

2. İNC., SC., 3 İNC., 2 SC., İNC., SC.

3. İNC., 4 SC., 3 İNC., 4 SC., İNC. (18) Tie

4.T. gray: (18)

5. (18)

6. (18)

7.5 SC., 4 DEC., 5 SC. (14)

8. DEC. 3 SC., 3 DEC., 3 SC. (ten)

9. Change the color (brown) and knit for BLO:

4 SC. DEC. 4 SC. (9) – (strapping SC. – for FLO: SC., İNC.)

10. – 15. (9) – (5 rows) (Right leg + 2 loops.

Trim the thread.

Body: – white.

Connect both legs 3 CH.

1. Knit in a circle: 9 SC. (3 SC. By CH.), 9 SC. (3 SC. By CH.) (24)

2. 8 SC. İNC. 3 SC. İNC. 11 SC. (26)

3. – 7. (26) 5 rows

8.7 SC. DEC. 2 SC. 2 DEC. 2 SC. DEC. 7 SC. (22)

9.7 SC. DEC. 4 SC. DEC. 7 SC. (twenty)

10. (20)

11. (20)

12. + hands: 4 SC. (3 SC., With hand), 7 SC. (3 SC., With hand), 3 SC.

13.4 SC. (4 SC., With hand), 7 SC. (4 SC., With hand), 3 SC.

If you want the snowman’s handles to move, insert the wire.

14. 3 SC. 4 DEC., 3 SC. 4 DEC.,

15.2 SC. 2 DEC. 4 SC. 2 DEC. (10)

16. Neck: (10)

17. Head: 10X2 (20)

18. (SC. İNC.) * 10 (30)

19. (9 SC.İNC.) * 3 (33)

20. – 24. (33) – 5 rows

25. (5 SC., DEC.) * 4, 3 SC. DEC.

26. (4 SC., DEC.) * 4, 2 SC. DEC.

27. (3 SC., DEC.) * 4, SC. DEC.

28. (2 SC., DEC.) * 4, 2 SC.

29. (SC. DEC) * 4, DEC.

30.2 DEC., Screw up, tighten, cut and hide the thread.

Pants – green

25 CH., Connect two ends and knit 10 rows in a circle – SC.

11 row, knit 12 SC., Fasten and cut the thread, skip the loop, with new thread knit 12 SC. fasten the thread, leave about 15-20 cm and cut .. put the orts on the snowman and sew between

legs.

Hat – gray

1.6 MR.

2.6×2 (12)

3. (SC., İNC.) * 6 (18)

4. (2 SC., İNC) * 6 (24)

5. (3 SC., İNC) * 6 (30)

6. (4 SC., İNC) * 6 (36)

7. – 13. knit “x” (grabbing the working thread through the top) (36)

14. for the front loop in the usual way (with a tick) – 5 SC. İNC (30)

15.6 SC. İNC,

16.7 SC. İNC.

17. strapping without İNC.

Red ribbon for the cap:

30 CH. into the second loop from hook 29 SC ..

Fasten the thread, leave a little for sewing, cut.

Wrap a red ribbon around the cap and join the edges, sew.

Cut out a small square in the form of a buckle from felt or foamiran and glue it onto a red ribbon. (see photo)

Nose – carrot (orange)

We knit in rotary rows: 2 MR.

1. turn 2×2 (4)

2. (SC. İNC.) * 2

Fasten the thread, leave a little for sewing and sewing.

Sew the edges together in a cone shape.

Pant straps (orange)

We knit 2 pcs.

20 CH., Turn 19 SC. fasten with a button.

Socks (color red and white)

We dial 13 CH. red, turn. In the second loop from the hook 2 SC (red), 2 SC. (white) etc. alternate to the end of the row

(12) Fasten the thread, tighten on the leg, fasten.

Bow (in red)

On the amigurumi ring, dial 3 CH in the first half of the ring. 2 DC. 3 CH. SL-ST, and the second half of the ring is 3 CH. 2 DC. 3 CH. SL-ST., Tighten (see photo)

Design

When registering, look at the photo, you can make a face tightening if you wish. Good luck and light loops.

The post Free Snowman Amigurumi Pattern appeared first on Amigurumi Patterns.

Materials I used:

● Yarn, I used YarnArt Jeans (approx. 5-8g of each color)

No. 01 – white, No. 68 – jeans, No. 85 – red, No. 51 – red, No. 07 – nude.

●Eyes 6-7 mm on a safe mount (I glue the eyes with glue)

●Filler, needle, scissors

●Hook No. 1.75-2.0

● dry pastel for tinting

You can use any yarn and hook.

Abbreviations

Mr – amigurumi ring

Sc – single crochet

Dec – decrease

İnc – increase – number of repetitions

Sl-st – connecting post

BLO – back half loop

FLO – front half loop

Ch – air loop

( ) – number of Sc in a row

( ) *n – n is the number of repetitions in brackets

Hands (2 pcs)

Beginning (bodily)

1) 6Sc in MR (6)

2) 6Sc

Color change (red)

3) for BLO 6Sc

4) 6Sc

Color change (white)

5-6) 6Sc

Change color (red)

7) 6Sc

Color change (white)

8–9) 6Sc (2 rows)

Change to red, fold and knit 3Sc.

Cut the thread, do not stuff it with holofiber, fasten it. If you are sewing parts, leave the thread for sewing.

Ears (2 pcs)

bodily

1) 4Sc in MR (4)

2) 4Sc

3) (İnc, 1Sc) *2 (6)

4) (İnc, 2Sc) *2 (8)

5) (İnc, 3Sc) *2 (10)

6) 10Sc

7) (İnc, 4Sc) *2 (12)

Fold in half, knit 6Sc.

Fold in half again and knit 3Sc. Fasten the thread and cut it

Legs (2 pcs)

Beginning (white)

1) 6Sc in MR (6)

2) 6İnc (12)

Color change (red)

3) for BLO 12Sc

Color change (white)

4) 12Sc

5) (1Sc, Dec) *4 (8)

Change color (red)

6) 8Sc

Color change (white)

7–8) 8Sc (2 rows)

Change color (blue)

9) for BLO 8Sc

10–11) 8Sc

On the first leg, knit offset stitches +3-4Sc, fold in half, knit 4Sc.

On the second leg, do not knit an offset loop, fold it in half, knit 4Sc.

Cap

Blue

1) 5 in MR

2) 5Sc

3) İnc, 4Sc (6)

4) (İnc, 2Sc) *2 (8)

5) (İnc, 3Sc) *2 (10)

6) (İnc, 4Sc) *2 (12)

7) (İnc, 5Sc) *2 (14)

8) (İnc, 6Sc) *2 (16)

9) (İnc, 7Sc) *2 (18)

10) (İnc, 8Sc) *2 (20)

11) (İnc, 4Sc) *4 (24)

12) (İnc, 5Sc) *4 (28)

13) (İnc, 6Sc) *4 (32)

14) (İnc, 3Sc) *8 (40)

15) (İnc, 9Sc) *4 (44)

16) (İnc, 10Sc) *4 (48)

17) (İnc, 7Sc) *6 (54)

18) 54Sc

Body-head

Start (blue)

1) 6Sc in MR (6)

2) 6İnc (12)

3) (1Sc, İnc) *6 (18)

4) (2Sc, İnc) *6 (24)

5) 24Sc

6) (4Sc with foot, 8Sc) *2 (24)

7–8) 24Sc (2 rows)

Color change (white)

9) for BLO 24Sc

10) (2Sc, Dec) * 6 (18)

Color change (red)

11) 18Sc

Color change (white)

12) 18Sc

13) (1Sc, Dec) * 6 (12)

Color change (red)

14) 3Sc with hand, 4Sc, 3Sc with hand, 2Sc (12)

Color change (white)

15) 12Sc

Color change (flesh)

16) for FLO 12İnc (24)

17) (3Sc, İnc) *6 (30)

Now there will be increases, these are future cheeks.

18) 6Sc, 3İnc, 7Sc, 3İnc, 11Sc (36)

19–20) 36Sc (2 rows)

18) 6Sc, 3Dec, 7Sc, 3Dec, 11Sc (30)

22–23) 30Sc (2 rows)

24) 3Sc, 3Sc with ear, 14Sc, 3Sc with ear, 7Sc (30)

25–27) 30Sc (3 rows)

Insert eyes between rows 21–22. 6Sc – before the eyes were inserted. 4Sc – when the eyes were inserted.

Color change (red)

28) 30Sc

29) for BLO (3Sc, Dec)* 6 (24)

30) (2Sc, Dec) *6 (18)

31) (1Sc, Dec) *6 (12)

32) 6Dec (6), pull and hide thread

Hair (red)

Let’s knit. join the thread to the 28th row behind the FLO.

Long strands: 9 Ch, from the 2nd loop from hook 8Sc,2Sc – repeat 6-7 times.

Short strands: 3 Ch, from the 2nd loop from hook 2Sc,2Sc – repeat 9 times.

Let’s start the design.

We distribute all the strands, sew them on or glue them with glue (I use B-7000 glue).

We embroider the eyebrows with black thread.

Embroider the nose with body-colored thread.

We embroider the mouth with red thread.

We embroider the whites of the eyes with white thread.

We do tinting on the cheeks and ears.

We sew the cap on if necessary.

  I will be glad if you liked this

The post Amigurumi Little Elf Free Pattern appeared first on Amigurumi Patterns.

Our Amigurumi Snowman Keychain pattern is crafted for creators of all skill levels, promising a joyful and satisfying experience. With clear instructions and accompanying images, crafting your winter-inspired keychain has never been more delightful.

Necessary materials:

 Alize Cotton Gold or YarnArt Jeans in white for a snowman, dark gray for felt boots and any other colors for a hat and scarf;

 Pekhorka baby new color Calendula for carrots;

 A little bit of any yarn for hair (I use Alize Cotton Gold and Alize Cotton Soft Baby, half the thickness);

 Hooks No. 2 and No. 1.5;

 Black beads 4mm for eyes;

 Large colored beads for buttons 2-3 pcs.;

 Black floss for embroidering the face and arms;

 Filler;

 Attachment for key fob;

 Tailor’s pins, scissors, needle.

* Taking into account these materials, my snowman turned out to be approximately 7 cm tall.

Conventions for knitting:

 ch – air loop;

 sc – single crochet;

 inc – increase (knit two sc in one loop);

 dec – decrease (knit two sc together behind the front walls);

 dc – half double crochet;

 sl-st – connecting post.

HEAD + BODY

(knit with white yarn, hook No. 2)

1) 6 sc in MR

2) 6 inc = 12

3) (1 sc, inc)*6 = 18

4) (2 sc, inc)*6 = 24

5) (3 sc, inc)*6 = 30

6) (4 sc, inc)*6 = 36

7-11) 36sc 5 rows

12) (4 sc, dec)*6 = 30

13) (3 sc, dec)*6 = 24

14) (2 sc, dec)*6 = 18

15) (1 sc, dec)*6 = 12

16) 12sc

17) 12 inc = 24

18) (3 sc, inc)*6 = 30

19) (4 sc, inc)*6 = 36

20) (5 sc, inc)*6 = 42

21-27) 42 sc 7 rows

28) (4 sc, dec)*7 = 35

29) (3 sc, dec)*7 = 28

30) (2 sc, dec)*7 = 21

31) (1 sc, dec)*7 = 14

32) dec to the end

We stuff it tightly, tighten the hole, and hide the tip of the thread.

CARROTS

(thinner yarn, hook No. 1.5)

1) 4 sc in MR

2) (1 sc, inc)*2 -= 6

3) 6 sc

Leave the long end of the thread for sewing.

FELT Boots

(gray yarn, hook No. 2)

1) 6 sc in MR

2) (1 sc, inc)*3 = 9

3) 9sc

Fold in half and knit 4 sc. We don’t stuff.

Leave the long end of the thread for sewing.

HAT

(hook No. 2)

1) 6 sc in MR

2) 6 inc = 12

3) (1 sc, inc)*6 = 18

4) 18 sc behind the back wall

5) 18 sc

6) behind the front wall: (2 DC, 1 DC in one)*8, 2DC, 1sc, 2 sl-st

Leave the long end of the thread for sewing.

SCARF

Cast on 45 ch and knit from the second loop from the hook 44 sc. Hide the ends.

DECOR

 Sew a carrot nose between 8 and 10 next to the crown.

 Sew on the eyes 1 row above the nose.

 Embroider the eyebrows, mouth and arms in black. Floss thread in 2 folds.

 Embroider the hair in any color and immediately make a loop.

For strength, I treat the loop with Moment glue.

 Sew on 2-3 buttons. (I have large beads).

 When sewing on the hat, add a little filler so that the hat holds its shape better.

 If desired, you can tint the cheeks.

The post Amigurumi Snowman Keychain Free Pattern appeared first on Amigurumi Patterns.

Rnd: round

MR: magic ring

ch: chain

inc: increase

dec: decrease

sl st: slip stitch

sc: single crochet

hdc: half double crochet

dc: double crochet

()*: repeat till the end of the round

[] total number of stitches in the round

Legs and body

Legs (x2)

Start with brown color.

Rnd 1: MR, 6 sc [6]

Rnd 2: (inc)* [12]

Rnd 3-19: 12 sc [12]

In Rnd 20, take the white yarn of the panties and continue with this color.

Rnd 20: 12 sc [12]

Stuff firmly.

Fasten off the first leg.

Crochet the second leg in the same way, but after Rnd 20 don’t cut the yarn. Keep the stitch marker in the same place.

Body

Rnd 21 continue 6 sc on the second leg (if the color change is in front of you after those 6 sc, you can add some stitches and move the stitch marker of same number of stitches, so that the color change is at the back)

Make a ch 6 and join to the first leg with 1 sc (choose the 6th stitch of the leg so that the color change is at the back), 11 sc on remaining stitches of the first leg, 6 sc (in ch 6), 6 sc on the second leg [36]

The beginning of the round is on the right side of the body.

Rnd 22: 6 sc, 6 sc on the other side of the ch, 5 sc, inc, 17 sc, inc [38]

Rnd 23: 6 sc, (1 sc, inc) x3, 26 sc [41]

Rnd 24: 41 sc [41]

Rnd 25: 6 sc, (inc, 2 sc) x3, 26 sc [44]

Rnd 26: 44 sc [44]

In Rnd 27, take the brown yarn of the skin and continue with this color.

Rnd 27: 44 sc [44]

In Rnd 28, take the red yarn of the dress and continue with this color.

Rnd 28: 44 sc [44]

In Rnd 28, take the dark brown yarn of the belt and continue with this color.

Rnd 29: back loop – 44 sc [44]

Rnd 30:44 sc [44]

In Rnd 31, take the red yarn of the dress and continue with this color.

Rnd 31: (dec, 20 sc)* [42]

Rnd 32:42 sc [42]

Rnd 33: 10 sc, (dec, 2 sc) x2, 24 sc [40]

Rnd 34: (dec, 18 sc)* [38]

Rnd 35:38 sc [38]

Stuff firmly and continue to

stuff as you go along with your work.

Rnd 36: (dec, 17 sc)* [36]

Rnd 37: (dec, 4 sc)* [30]

Rnd 38:30 sc [30]

Rnd 39: (dec, 3 sc)* [24] Rnd 40:24 sc [24]

In Rnd 41, take the pink yarn of the skin and continue with this color.

Rnd 41: back loop – (dec, 2 sc)* [18]

Rnd 42:18 sc [18]

Fosten off.

In front loops of Rnd 29, legs on the top take the yarn of the skirt and crochet:

Rnd 1: (inc dc) [88]

Rnd 26: 88 dc [88]

In Rnd 7, take the white yarn. Rnd 7:88 sc [88]

stitch

In front loops of Rnd 40, (last of the row to be centered, to be adapted according to your case), take the white yarn and crochet: Rnd 1: 24 sc [24]

Rnd 21 sl st, 1 hdc, inc dc, 1 hdc, 2 sl st, 1 hdc, inc dc, 1 hdc, 15 sl st [26]

Arms (x2)

Start with brown color.

Rnd 1: MR, 6 sc [6]

Rnd 2: (inc)* [12]

Rnd 3-5:12 sc [12]

In Rnd 6, take the red yarn of the dress and continue with this color.

Rnd 6: (4 sc, dec)* [10]

Rnd 7: back loop – 10 ms [10]

Rnd 820: 10 sc [10]

Fold and crochet 5 through both sides to close.

sc

In front loops of Rnd 6, hand on the top take the White yarn and crochet 10 sc.

Fasten off and leave a long thread for assembling.

Sew the arms on the body btw Rnds 41 and 42.

The post Amigurumi Christmas Mrs Deer Free Pattern appeared first on Amigurumi Patterns.

Semi-thick cotton thread in light salmon, white, green, red, black, a little yellow and brown.

3mm crochet hook

12mm safety eyes

silicone fleece

wool sewing needle

Abbrevations:

ch-chain

sc-single crochet

inc- increase

dec- decrease

sl-st-slipped or dwarf or run point

Head

Knit in light salmon colored cotton yarn.

1- Magic Ring, 6 sc (6)

2-6 inc (12)

3- (1 sc, inc) x6 (18)

4-1 sc, inc, (2 sc, inc) x5, 1 sc (24)

5- (3 sc, inc) x6 (30)

6-2 sc, inc, (4 sc, inc) x5, 2 sc (36)

7-(5 sc, inc) x6 (42)

8- 3 sc, inc, (6 sc, inc) x5, 3 sc (48)

9-17 sc, inc) x6 (54)

10 to 19- (54)

The safety eyes are placed between rows 16 and 17, there must be 6 points of separation between them.

20-17 sc, dec) x6 (48)

21-(2 sc, dec) x12 (36)

22-2 sc, dec, (4 sc, dec) 5.2 sc (30)

23-(3 sc, dec) x6 (24)

24- 1 sc, dec, (2 sc, dec) x5, 1 sc (18)

Body

Knit in green yarn. Start with the legs.

1- Magic Ring, 6 sc (6)

2-6 inc (12)

3 to 4-(12) 5- 3 sc, inc (15)

6 to 7- Change to white color (15)

8 to 9- Change to green color (15)

10 to 11 – Change to white color (15)

12 to 13- Change to green (15) Knit two equal legs, when you finish knitting the second, do not cut the thread and continue.

14- Change to red. Make two chains in the air, take the first leg and knit 15 sc, 2 sc on one side of the chains, 15 sc on the second leg, 2 sc on the other side of the chains.

So both legs are joined. Fill as you knit.

15-16 sc, inc, 16 sc, inc (36)

16 to 18-(36)

19- Change to black. 4 sc, dec (30)

20- (30)

(Continued on the next page)

21 to 23- Change to green color (30)

24-3 sc, dec (24)

25 to 27-(24)

28-2 sc, dec (18)

29-(18) Close.

In the center of the belt embroider a buckle with yellow cotton thread.

Arms

Knit in light salmon colored cotton yarn.

1- Magic Ring, 8 sc (8)

2- inc, 7 sc (9)

3- Change to green thread (9)

4 to 13-(9)

14-dec, 7 scs (8)

To close. The arms are sewn between rows 28 and 29.

Ears

Knit in light salmon yarn.

1- Magic Ring, 6 sc (6)

2-(6)

3- 1 sc, inc (9)

4-(9)

5-2 sc, inc (12)

6- (12)

7- 3 sc, inc (15)

8 to 10- (15)

Close and leave a strand of thread for sewing.

It is sewn folded in half between rows 14 and 16.

Hat

Tojor in red thread.

1 Magic Ring, 4 sc (4)

2-4 inc (8)

3 to 4-(8)

5- 1sc, inc (12)

6 to 7-(12)

8- 3 sc, inc (15)

9 to 10-(15)

11- 4 sc, inc (18)

12 to 13- (18)

14-5 sc, inc (21)

15-(21)

16- 6 sc, inc (24)

17-(24)

18-7 sc, inc (27)

19- (27)

20 8 sc, inc (30)

21-(30)

22-5 sc, inc (35)

23 to 24-(35)

25- 6 sc, inc (40)

26 to 27- (40)

(Continued on the next page)

28-7 sc, inc (45)

29 to 30- (45)

31-8 sc, inc (50)

32- (50)

33-9 sc, inc (55)

34-10 sc, inc (60)

35- 11 sc, inc (65)

36-through the front loop (65)

37- through the front loop, 12 sc, inc (70)

Take into account that the hat fits Hans’s head, if the yarn is not the same thickness as the head I can vary it, make more or fewer rows with increases to adapt the hat to his head. Close and leave a strand of thread for sewing. As a detail, embroider three stars in yellow.

In the center of the hat and taking the strand that was left out, make Hans’s fringe by knitting 8 chains for the first tuft, and then knit over those chains, skip the first stitch, make a slip stitch, 2 sc, 2 half double crochet, double crochet and slip stitch skipping a base stitch.

Now the second lock of the bangs is done, make 6 chains, skip the first stitch, 2 slip stitches, 3 sc. 1 mv, slip point and close.

The post Amigurumi Elf Hans Free Pattern appeared first on Amigurumi Patterns.

Yarn 165 m/50 gr

Hook 1.75-2.00 mm

filler

Cork

Mouline thread for embroidery, beads, bell The size of the toy is about 9-12cm

Abbreviations

SC – single crochet

CH – air loop

İNC – increase, knit 2 SC from one loop

DEC – decrease, knit 2 SC together

SL-ST – connecting post

DC – double crochet

HDC – half double crochet

Christmas trees

Big

1. 6 SC per amigurumi ring

2. (1 SC, İNC)x3 (9)

3-4. (9)

5. (2 SC, İNC)x3 (12)

6-7. (12)

8. (3 SC, İNC)x3 (15)

9-10. (fifteen)

11. (4 SC, İNC)x3 (18)

12-13. (eighteen)

14. (5 SC, İNC)x3 (21)

15-16. (21)

17. (6 SC, İNC)x3 (24)

18-19. (24)

20. (7 SC, İNC)х3 (27)

21-22. (27)

23. (8 SC, İNC)х3 (30)

24-25. (thirty)

26. (9 SC, İNC)х3 (33)

27-29. (33)

Small

1.6 SC in the amigurumi ring

2. (1 SC, İNC)x3 (9)

3. (9)

4. (2 SC, İNC)x3 (12)

5. (12)

6. (3 SC, İNC)x3 (15)

7. (15)

8. (4 SC, İNC)x3 (18)

9. (18)

10. (5 SC, İNC)x3 (21)

11. (21)

12. (6 SC, İNC)x3 (24)

13. (24)

14. (7 SC, İNC)x3 (27)

15. (27)

16. (8 SC, İNC)x3 (30)

17. (30)

18. (9 SC, İNC)х3 (33)

19. (33)

The base is knitted the same way.

for both trees:

20. (9 SC, DEC)x3 (30)

21. (3 SC, DEC)x6 (24)

22. behind the back half loop (2 SC, DEC) x6 (18)

23. for both half loops (1 SC, DEC) x6 (12)

24. 6xDEC (6)

Pull the hole.

For the loops of the 22nd row we knit 18 DC.

Now we insert the cork, it can first be smeared with colorless varnish so that the cork

stuck to the tree.

For decor, use beads and a shiny floss. Beads can be sewn immediately with the help of floss, so there will be a garland effect. We sew a bell on top.

The post Amigurumi Christmas trees Free Pattern appeared first on Amigurumi Patterns.

Material

skin color

Red Green

Thread in desired color for hair

Mother’s Lamb Rope

8mm eye

Black and red thread for eyebrows and mouth

bead silicon fiber

TERMS

mr..magic ring

SC..single crochet

INC.. increase

dec.. decrease

Blo..knit from the back loop

Flo..knit from the front loop

ch..chain

Hdc.. half double crochet

sl-st.. slip-stitch

JACKET

1.27 ch. 26 sc from the second.

2.8 ch.make bottom for buttonhole return 1inc, 3sc, 1inc, 4sc, 1inc, 6sc, 1inc, 4sc, 1inc, 3sc, 1inc, 1ch repeat in each row

3.5sc, 1inc, 5sc, 1inc, 7sc, 1inc, 5sc, 1inc, 5sc

4.5sc, 1inc, 6sc, 1inc, 4sc, 1inc, 3sc, 1inc, 6sc, 1inc, 6sc

5.6sc, 1inc, 7sc, 1inc, 5sc, 1inc, 4sc, 1inc, 7sc, 1inc, 6sc

6.7sc, 1inc, 4ch.1inc, 12sc, 1inc, 4ch.1inc, 7sc

7.8sc, 4sc on 4ch., 15sc, 4sc on 4ch. 8sc

Sc in each row up to 8-16.. finish

Make 17sc for the arm, finish each row with sl-st

Rank up with 1ch make 8 rows

With the mother’s lamb, make 1sc in each loop and make it at the end of the arm that goes around it.

DRESS

1.29 ch check 2. ch. make 28sc from

2.8ch.draw bottom bat 4sc, 1inc, 4sc, 1inc, 8sc, 1INC, 4sc, 17.4sc,..32

1ch pull back in each row

3.4sc, 1inc, 5sc, 1inc, 9sc, 1inc, 5sc, 1inc, 5sc,

4.5sc, 1inc,6sc, 1inc, 10sc, 1inc, 6sc, 1inc, 5sc,

5.5sc, 1inc, 4ch.7sc skip 1inc, 11sc, 1 inc, 4ch, 7sc, skip 1inc, 6sc,

6.7sc, 4sc over 4ch, 14sc, 4sc over 4ch, 7sc,

7.36sc

8.8ch sink to bottom ..36sc

Combine with 9-10..36sc sl-st

11. 2ch. every sc. Make 1hdcinc ..72 hdc. sl-st

12.2 ch. 1 hdc, 1hdcinc, row length ..SL-ST

13-20… (8 rows) 1hdc rows in each stitch, combine the ends into sl-st and finish. Make 1sc in each loop with the mother’s lamb on the hem and finish.

CAP

1. Mr. 4sc

2. (1sc, 1inc)*2 .. 6sc

3. 6sc

4.(2sc, 1inc)*2 …8sc

5-9..8sc

10.(3sc, 1inc)*2 .. 10sc

11-12..10sc

13.(4sc, 1inc)*2 12sc

14. 12sc

15.(3sc, 1inc)*3 .15sc

16.(4sc, 1inc)*3 ..18sc

17. 18sc

18.(2sc, 1inc)*6 ..24sc

19.(3sc, 1inc)*6 .30sc

20.2sc, 1inc, (4sc, 1inc)*5, 2SC, ..36SC

21. (5sc, 1inc)*6.42sc

22.3sc, 1inc, (6sc, 1inc)*5 3sc, ..48sc

23. (7sc, 1inc)*6 ..54sc

24.4sc, 1inc, (8sc, 1inc)*5 60sc

25.hdc. ..60sc

26-27.. hdc ..60 sc

29. Finish 11sc, 1dec, 13sc, 1dec, 13sc, 1dec, 12sc, 1dec

Make a sl-st with 3 rows of mother’s lamb Make a pom-pom and sew it on top

JACKET

1.27 ch. 26 SC from the second.

2.8 ch.make bottom for buttonhole return 1inc, 3sc, 1INC, 4sc, 1inc, 6sc, 1INC, 4sc, 1inc, 3sc, 1inc, 1ch repeat in each row

3.5sc, 1inc, 5sc, 1inc, 7sc, 1inc, 5sc, 1inc, 5sc

4.5sc, 1inc, 6sc, 1inc, 4sc, 1inc, 3sc, 1inc, 6sc, 1inc, 6sc

5.6sc, 1inc, 7sc, 1inc, 5sc, 1inc, 4sc, 1inc, 7sc, 1inc, 6sc

6.7sc, 1inc, 4ch.8sc, skip1inc, 12sc, 1inc, 4ch.8sc, skip 1inc, 7sc

7.8sc, 4sc on 4ch., 15sc, 4sc on 4ch. 8sc

Sc in each row up to rows 8-16 and finish

17sc knit for the arm, end each row with sl-st

Rank up with 1ch make 8 rows

With the mother’s lamb, make 1sc in each loop and make it at the end of the arm that goes around it.

ARM (2 pcs)

1.mr 6sc

2..(2sc, 1inc)*2 ..8sc

3.. (1sc, 1inc)*4 .. 12sc

4.. 22.. (19 rows) .. 12sc

FEET (2 pcs)

1.Green thread with mr. 6sc

2.6INC,..12sc

3.(2sc, 1INC)*4 ..16sc

4-9.. (6 rows) ..16sc switch to tan

10.BLO ..16sc Make 16 sc with FLO

11-28.. (18 rows) ..16sc switch to red color

29-30.. (2 rows) ..16sc will start the size without breaking the rope when the second leg is knitted

31. Join 2 ch. to other leg with sl-st 16sc, 2sc on 2 ch, 16sc, 2sc on 2 ch put the start mark here

32.3sc, 1inc, 7sc, 1inc, 10sc, 1inc, 7sc, 1INC, 5sc, ..40sc

33-36.. (4 rows)..40sc switch to tan

37..9sc, 1dec, 18sc, 1dec, 9sc

38-40. (3 rows)

41.9sc, 1dec, 18sc, 1dec, 8sc

42-45.. (4 rows)

46.(4sc, 1dec)*6

47. 30sc

48.(3sc, 1dec)

Arm Joint

49.7sc, 3sc from sleeve and size 9sc,3sc,2sc from sleeve and size ..24

50.(3sc, 1dec) row length

51.(2sc, 1dec)

52.6sc, 1dec, 8sc, 1dec, 2sc,

53.(1sc, 1dec)*6

54- 55. 12sc

56.(1sc, 1inc)*6 ..18

57.(2sc, 1inc)*6 . ..24

58.(3sc, 1inc) ..30

59.(4sc, 1inc) …36

60.(5sc, 1inc)

61.(6sc, 1inc)

 62-71.. (10 rows) ..48

72..(6sc, 1dec)*6 ..42

73.42sc

74.(5sc, 1dec)*6 ..36

75.36 sc

76.(4sc, 1dec) ..30

77.(3sc, 1dec) ..24

78.(2sc, 1dec) ..18

79.(1sc, 1dec) ..12

Gather the remaining loops with 80.6dec end yarn.

Insert the eyes between the 67th and 68th rows, with 9sc in between.

HAIR

1.mr. 6sc

2.(1sc, 1inc)*6 ..12

3.(2sc, 1inc)*6 ..18

4.(3sc, 1inc) 24

5.(4sc, 1inc) ..30

6.(5sc, 1inc) ..36

7.(6sc, 1inc) …42

8-12. (5 rows) ..42

cut the thread long to sew.

For braiding, leave 12sc in the middle and braid 9sc of hair on both sides.

The post Amigurumi Christmas Doll Layla Free Pattern appeared first on Amigurumi Patterns.

Yarn:

– Yarn Art Jeans: 01(white), 07(beige), 26(red), 52(green), 40(brown) for the insole, 53(black), 86(milky) for the hair.

– Yarn Art Velor white.

– a little yellow or gold yarn for embroidering the buckle.

– a thin contrast thread – a marker. Be sure to use a marker!

– a hook of the right size for your yarn, I have it No. 2;

– filler (holofiber, sintepukh);

– glass eyes 10mm;

– Glue Moment Crystal;

– white felt for the white of the eyes;

– a piece of plastic for insoles, I use old discount cards;

– a needle for stitching parts;

– scissors;

– pastels for toning cheeks.

If desired, you can use a weighting agent, I use aquarium soil.

The growth of the finished toy, with the specified materials 25cm.

Legend:

sc – single crochet, knit for both walls of the loop, unless otherwise indicated in the description;

ch – air loop;

sl-st – connecting column, do not knit it too tight;

Dec – decrease (2sc together for the front walls)

İnc – increase (2sc from one loop)

HDC – half double crochet

DC – double crochet

* – after this asterisk, the number of repetitions of knitted loops is indicated

General recommendations for knitting toys:

– I recommend that you first carefully read the description of the toy, then start knitting.

– Choose a hook according to your density! There should be no distance between the columns, the filler should not shine through, but you don’t need to knit too tightly either, the fabric should turn out to be plastic, and not be wooden.

– Use a good filler to prevent bumps and bumps when filling the toy.

– All parts are knitted in a spiral, the lifting loop at the beginning of the row and the connecting loop at the end of the row are not used.

– All loops, except for the decrease loop, are knitted behind both walls of the loop. Knitting loops for the front or back wall is indicated in the description of the row.

– Please note that the connecting column is not knitted tight.

– Use a thin, contrasting marker thread to mark the beginning of the row. Before knitting the first loop of the row, throw it alternately: before knitting and after knitting.

– The toy is knitted face out, fig.1.

– The thread is changed as follows:

You knit the last sc not to the end, i.e. insert the hook behind both walls of the loop (when knitting a decrease, we insert the hook behind the two front walls), bring the thread out – there are two

loops, then take a thread of a different color and knit these loops with a new color.

– When making the head, enter and exit all the threads at the bottom of the head, in the place where the head will be sewn to the body, so that it is convenient to fasten and hide them.

Arms:

The right and left hand are knitted differently to hide the color transition. First we knit mittens. We start knitting in red. We fill only the palm.

Finger:

1. 6sc into magic ring – 6sc

2-4. 6sc

Fasten the thread, cut. Tie two fingers, for the right and left hand. We do not stuff our fingers.

Palm:

1.6sc

2.6inc – 12sc

3. (3sc, inc) *3 – 15sc

4-6. (3 rows) 15sc

Next, we attach a finger, the place of attachment for the right and left hands is different. When attaching the parts, we put them facing each other, we pick up the finger loops from the inside.

Right hand:

7. 3sc, 2sc with finger, 10sc – 15sc

8. 3sc, 4sc on the finger, 10sc – 17sc

9. 4sc, dec, 6sc, dec, 3sc – 15sc

Left hand:

7. 10sc, 2sc with finger, 3sc – 15sc

8. 10sc, 4sc on the finger, 3sc – 17sc

9. 3sc, dec, 6sc, dec, 4sc – 15sc

Further, the hands are knitted in the same way.

10. (3sc, dec) *3 – 12sc, change the thread to white, fasten the red thread and cut off.

Fill your palm well. Knit the next row behind the back wall.

11. (2sc, dec)*3 – 9sc

12. 9sc in white.

Next, alternate white and green colors in 2 rows.

Knit an offset loop as needed so that the color transition does not shift or go to the side.

13-27. (15 rows) 9sc

Finish the hand with one row of white. Fasten the thread, cut.

Attach plush yarn to row 11 and work 12sc behind the front walls of row 11, holding the hand mitten down.

Legs:

We knit two identical legs.

We start by knitting the nose of the shoe in green:

1. 6sc into magic ring – 6sc

2.6sc

3. 5sc, inc – 7sc

4. 6sc, sc behind the back wall – 7sc

5. 6sc, inc behind the front wall of the previous (3rd) row – 8sc

6. 7sc, sc behind the back wall – 8sc

7. 7sc, inc to the front the wall of the previous (5th) row – 9sc

8. 8sc, sc behind the back wall – 9sc

9. 8sc, inc to the front wall of the previous row – 10sc

10. 9sc, sc behind the back wall – 10sc

11. 9sc, inc to the front wall of the previous row – 11sc

12. 10sc, sc behind the back wall – 11sc

13. 10sc, inc to the front wall of the previous row – 12sc

14. 9sc, inc, sc, inc – 14sc

15. 10sc, inc*4 – 18sc

16.18sc

Fasten the thread, cut.

Step back from the marker clockwise 1sc, put a marker, for the next 8sc the nose will join the insole, mark the 8th loop with a marker for convenience.

Insole, brown:

We dial 6ch, we start knitting from the second loop from the hook.

1. inc, 3sc, 4sc in the last loop, turn the chain, 3sc, inc – 14sc.

We put a marker.

2. inc*2, ​​3sc, inc*4, 3sc, inc*2 – 22sc

3. (sc, inc)*2, 3sc, inc*8, 3sc, (sc, inc)*2 – 34sc,

change the thread to green.

We circle the insole on the plastic, cut out two parts.

We knit the next row behind the back wall, attach the nose of the shoe, note that we knit the insole behind the back wall, and the nose behind both walls of the loop.

Attach the nose to the insole as shown in the photo, right sides to each other.

4. 13sc, 8sc with shoe toe, 13sc – 34sc

In the next row, when knitting a decrease, you need to hook the front wall of the loop knitted together with the nose on the hook to avoid the appearance of holes.

5. 12sc, dec, 8sc, dec, 12sc – 34sc

We knit the following decreases in the usual way.

6. 11sc, dec, 8sc, dec, 11sc – 32sc

7. 11sc, dec, 6sc, dec, 11sc – 30sc

We insert the insole, we stuff the nose well, then we stuff the leg tightly as we knit.

8. (3sc, dec) * 6 – 24sc

9. (2sc, dec) *6 – 18sc

We fix and cut the thread. The marker runs exactly down the middle of the back of the leg. If desired, weighting agents can be added to the legs. I am using aquarium soil.

For the right leg, we retreat 4sc clockwise from the marker, attach the white thread.

For the left leg, we retreat 4 sc counterclockwise from the marker, attach a white thread.

We align the marker as we knit, knitting an offset loop so that the color transition remains inside the leg and does not move.

Knit the next row behind the back wall

10. (sc, dec) * 6 – 12ch

In the next row we attach a red thread, in the 12th row we attach a green thread, then we change the color of the thread each row.

11-34. (24rows) 12sc

We finish knitting the leg in white so that the last loop is exactly on the side of the leg. We fix the threads, cut off.

Attach a plush thread to the 9th row and knit 18sc behind the front walls of the 9th row, keeping the leg of the feet down.

Body:

We stuff the body tightly as we knit.

From the right leg to the left, knit in red 6 ch

1. 12sc on the left leg, 6sc on the ch chain, 12sc on the right leg, 3sc on the chain, – 33sc, change the thread to green, put a marker. We did not work 3sc in the chain to the end of the row in order to place a marker in the middle of the back.

We start knitting the second row with 3sc along the chain.

2. (5sc, inc) * 6 – 42sc

We knit the next row in white, alternating colors each row up to the 9th row inclusive.

3. 3sc, inc, (6sc, inc) * 5, 3sc – 48sc

4-8. (5 rows) 48sc

9. 7sc, dec, (14sc, dec) *2, 7sc – 45sc

We knit the next two rows in white, then change the thread to green. Fasten the red thread and cut off. Next, alternate the colors in two rows. Tightly fill the junction of the legs and body, in this place there should not be a void.

10. (13sc, dec) *3 – 42sc

11.42sc

12. 6sc, dec, (12sc, dec) * 2, 6sc – 39sc

13-14. 39sc

15. (11sc, dec) * 3 – 36sc

16-17. 36sc

18. 5sc, dec, (10sc, dec) * 2, 5sc – 33sc

19-20. 33sc

21. (9sc, dec) * 3 – 30sc

Pay attention, in the next row we attach hands, the marker should be exactly in the middle of the back. Knit alignment loops if necessary. Try on your hands so that the color transition remains on the inside and the fingers look slightly inward. We pick up the loops of the hand from the inside, applying the parts with the right side to each other.

22. 7sc, 3sc with hand, 10sc, 3sc with hand, 7sc – 30sc

In the next row, holes may form at the junction of the arms, so we will knit the junction of the arms and body with an invisible decrease. To do this, we will knit the first loop of the arm together with the front wall of the loop of the body, knitted together with the arm in the previous row. See photo. In the same way, knit on the other side of the hand, picking up the loop of the previous row by the front wall.

23. 7sc, 6sc on the hand, 10sc, 6sc on the hand, 7sc – 36sc

24. 2sc, dec, (4sc, dec) *5, 2sc – 30sc

25. (3sc, dec) *6 – 24sc

26. sc, dec, (2sc, dec) * 5, sc – 18sc, change thread to body color

27. 18sc behind the back wall.

Fasten the thread, leave a long end for sewing, cut off. Stuff the body and neck very tightly, so that when sewing on the head does not collapse.

Shorts:

Shorts need to be knitted a little looser than usual, for this you can take a half-size larger hook or just knit not tight.

With a red thread, dial 45ch, close around. The shorts are knitted in half-columns with a crochet. We start the row with 2 ch, counting them as the first loop.

1-4. 45hdc

Next, separate the pants.

1. 22 hdc, 23hdc knit by connecting 23 and the first loop together, closing around.

2-3. 23hdc

The next row is knitted with plush thread.

4.23sc

Fasten the threads, cut off, hide the ends.

The second leg is knitted in the same way, but we knit the first loop from the junction of 23 and 1 loops of the first leg.

Next, we attach a black thread to the top and knit two rows of 45sc each, change the thread to red, knit 45hdc, fasten the threads, hide. We embroider loops with a red thread, a buckle with a yellow thread. We put shorts on the elf.

Pompoms for shoes:

From plush yarn, knit pompoms for shoes:

1. 6sc into magic ring

2.6sc

Fasten the thread, cut. Choose a place for the pom-pom: the tip of the nose of the shoe or the top of the shoe. Sew the pom-poms to the shoes with white yarn Yarn Art Jeans, dividing it in two.

Head:

We knit in flesh color.

If you use the eyes on a secure fastening, then insert them in the 16th row, stepping back from the marker about 21-22sc, the distance between the eyes is 6-8sc.

1. 6sc into magic ring – 6sc

2.6inc – 12sc

3. (sc, inc)*6 – 18sc

4. sc, inc, (2sc, inc) * 5, sc – 24sc

5. (3sc, inc)*6 – 30sc

6. 2sc, inc, (4sc, inc)*5, 2sc – 36sc

7. (5sc, inc)*6 – 42sc

8. 3sc, inc, (6sc, inc)*5, 3sc – 48sc

9-16. (8 rows) 48sc

17. 17sc, (inc, sc) *2, inc, 4sc, (inc, sc) *2, inc, 17sc – 54sc

18.54sc

19. 17sc, (inc, 2sc) *2, inc, 6sc, (inc, 2sc) *2, inc,

17sc – 60sc

20-22. (3 rows) 60sc

23. 18sc, (dec, 2sc)* 2, dec, 6sc, (dec, 2sc), dec, 16sc

24.54sc

25. (7sc, dec)*6 – 48sc

26. 3sc, dec, (6sc, dec)*5, 3sc – 42sc

27. (5sc, dec)*6 – 36sc

28. 2sc, dec, (4sc, dec)*5, 2sc – 30sc

29. (3sc, dec)*6 – 24sc

30. sc, dec, (2sc, dec) * 5, sc – 18sc

Fasten the thread, cut. Stuff your head tightly.

Nose:

We knit in flesh color.

1. 6sc into magic ring – 6sc

2. (inc, sc) * 3 – 9sc

3.9sc

4. (sc, dec) * 3 – 6sc

Fasten the thread, leave a long end for sewing, cut off. Put some filler in the nose.

Between the increments of 17 and 19 rows is the middle of the face, we will be guided by it in the further design of the head.

In order to make it easier to find the place for sewing on the nose, turn the head over, mark two loops with pins, between the 18th and 20th rows of the head – in the 19th row with increments, in the middle, retreating 2 loops to the center from the increments. The dots in the photo indicate the increments of the series. Sew on the nose. Bring the thread out at the bottom of the head.

Next, we will make eye tightening and smiles.

First, let’s put labels for the eyes. For convenience, we turn our head over again, with pins we select a loop between the first increments of the 17th row from the middle of the face. The distance between the pins is 6 loops.

Now we will make marks for a smile, to do this, turn your head to a normal position, step back 7 rows from the eye mark, focusing on the sewn nose, step back 4 loops from the middle of the face and highlight the next, 5th loop with pins.

Thread the needle with flesh-colored thread or dental floss. Insert the needle from the bottom of the head, into the hole, withdraw at point 1, enter at point 2, withdraw at point 3, pull the thread, insert the needle at point 4, then pull the thread again, a cheek should form.

Repeat tightening two times. Repeat the tightening with the second eye.

Next, embroider a smile. To do this, insert the red thread into the needle. Insert the needle into the hole from the bottom of the head, bring the needle out in the lower tightening on the left, insert the thread into the tightening on the right, pull the thread slightly, bring the needle out approximately in the middle of the smile two or three rows below the tightening, grab the thread and insert the needle into the same hole, tighten the thread and form a smile.

Glue on the eyes. We take a glass eye, draw the white of the eye on a piece of paper, the way we like it, you can make a round highlight or more anatomical, choose to your taste.

I draw a slightly elongated shape. We cut out our blank from paper and cut out two highlights from felt. On the Moment Crystal glue, glue the glare in the place of the eyes, wait for it to dry, glue the eye itself, now we are waiting for the eye to dry completely.

After the eyes are completely dry, we embroider the contour of the eye from above with a black thread. Insert the needle from the bottom of the head, bring it out at point 1 and enter it at point 2, while slightly pulling the thread, if the thread does not lie, it can be slightly glued using a toothpick and a very small amount of Moment Crystal glue.

Ears:

We knit two identical parts in flesh color.

1. 4sc into magic ring

2. (sc, inc) * 2 – 6sc

3. (2sc, inc)*2 – 8sc

4. (3sc, inc)*2 – 10sc

5. (4sc, inc)*2 – 12sc

6. (5sc, inc)*2 – 14sc

7-8. 14sc

9. (5sc, dec)*2 – 12sc

10.6dec

Leave a long end for sewing, secure the thread, cut off. Pull off the hole from the remaining 6sc, sew behind the side of the ear to the head, stepping back from the eyes about 7-8sc, between 15 and 20 rows.

Hair:

With the color of the hair we knit the part behind the back wall.

1. 6sc into magic ring – 6sc

2.6inc – 12sc

3. (sc, inc)*6 – 18sc

4. sc, inc, (2sc, inc) * 5, sc – 24sc

5. (3sc, inc)*6 – 30sc

6. 2sc, inc, (4sc, inc)*5, 2sc – 36sc

7. (5sc, inc)*6 – 42sc

8. 3sc, inc, (6sc, inc)*5, 3sc – 48sc

9-11. (3 rows) 48sc

We knit one sl-st, then turn the part over and knit along the resulting spiral of the front loops:

7ch, 2sl-st * repeat until the end of the spiral.

Got short curls. Try on a wig, fix with pins and sew to head.

Cap:

We start knitting with plush yarn:

1. 6sc into magic ring

2.6inc 12sc

3. (sc, inc) * 6 – 18sc

4.18sc

5. (sc, dec) – 12sc

Put filler.

6.6dec-6sc

Attach a green thread, knit 6sc, then

we knit with double crochets, we also knit increments from

double crochets. We start the row with 2 or 3ch, counting ch as the first loop.

1. (2dc inc)*2 – 8dc

2.8dc

3. (3dc, inc)*2 – 10dc

4.10dc

5. (4dc, inc)*2 – 12dc

6.12dc

7. (5dc, inc)*2 – 14dc

8. (6dc, inc)*2 – 16dc

9. (7dc, inc)*2 – 18dc

10. (8dc, inc)*2 – 20dc

11. (9dc, inc)*2 – 22dc

12. (10dc, inc)*2 – 24dc

13. (11dc, inc)*2 – 26dc

14. (12dc, inc)*2 – 28dc

15. (13dc, inc)*2 – 30dc

16. (14dc, inc)*2 – 32dc

17. (15dc, inc)*2 – 34dc

18. (16dc, inc)*2 – 36dc

19. (17dc, inc)*2 – 38dc

20. (18dc, inc)*2 – 40dc

21. (19dc, inc)*2 – 42dc

22. (20dc, inc)*2 – 44dc

23. (21dc, inc)*2 – 46dc

24. (22dc, inc)*2 – 48dc

25. (23dc, inc)*2 – 50dc

26. (24dc, inc)*2 – 52dc

27. (25dc, inc)*2 – 54dc

28. (26dc, inc)*2 – 56dc

29. (27dc, inc)*2 – 58dc

30-32. (3 rows) 58dc

Fasten the thread, cut. Next, knit with plush thread.

33-34. 58sc

Fasten the thread, cut. Hide the ends.

Sew the head to the body. Dry or oil pastels

using a hard brush to make a light blush on the elf.

In the absence of pastels, you can use regular blush.

Addition to the description of the elf Noel.

Elf Noemi knits according to the description of Elf Noel, the differences are minimal.

Wig:

The wig turns out to be heavy, so the head will fall over, I recommend making an elf using a frame or simply inserting a strengthener into the body-head when sewing.

You can use a pen body without a stem, thick wire, sushi sticks, etc. I recommend wrapping the stiffener with a woven patch so that it does not come out of the doll.

We knit every second row of the wig behind the back wall.

1. 6sc into magic ring

2. 6 inc behind the back wall – 12sc

3. (sc, inc)*6 – 18sc

4. behind the back wall sc, inc, (2sc, inc) * 5, sc – 24sc

5. (3sc, inc) *6 – 30sc

6. behind the back wall 2sc, inc, (4sc, inc)*6, 2sc – 36sc

7. (5sc, inc)*6 – 42sc

8. behind the back wall 4sc, inc, (6sc, inc) * 5, 4sc – 48sc

9.48sc.

Next, we knit a chain of 50ch into each loop of the 9th row, we knit connecting posts along it, we get a light curl, we make 8 curls short: 6-8 ch each, this will be a bang. There are 48 curls in total.

Next, we knit curls only in the 6th row, knit 52 ch into each loop, knit connecting posts into the ch chain, while knitting the connecting post into the second loop of the chain, counting from the base of the wig, grab the front wall of the 8th row. Thus, the curls will lie on the head. There are 36 curls in total.

Next, we knit curls of the 2nd row from 54ch, capturing the front walls of the 4th row when knitting the second ch. Only 6 curls.

Dress.

We knit the handles in plain colors after the mittens (green). We enter the main color of the dress (green) in the 10th row of the body, we knit the 11th row of the body behind the back wall, then we knit the body according to the description, but in one color.

For the 11th row of the body, attach the thread and knit the skirt dc with the lifting loops at the beginning of the row, count the lifting loop as the first loop of the row:

1. 2dc in one loop, 3dc in one loop, alternate to the end of the row – 105dc

2-5 (4 rows) 105 dc, change to plush.

6.105 sc

If desired, embroider snowflakes on the skirt, decorate with beads.

Cape:

Cast on 22 stitches in red.

1. 5dc, (3dc in one loop)*2.8dc, (3dc in one loop)*2.5dc

2. 6dc, (3dc single stitch)*2, 2dc, (3dc single stitch)*2, 10dc, (3dc single stitch)*2, 2dc, (3dc single stitch)*2, 6dc

3. 7dc, (3dc single stitch)*2, 4dc, (3dc single stitch)*2, 12dc, (3dc single stitch)*2, 4dc, (3dc single stitch)*2, 7dc

4. 8dc, (3dc single stitch)*2, 6dc, (3dc single stitch)*2, 14dc, (3dc single stitch)*2, 6dc, (3dc single stitch)*2, 8dc

5. 9dc, (3dc single stitch)*2, 8dc, (3dc single stitch)*2, 16dc, (3dc single stitch)*2, 8dc, (3dc single stitch)*2, 9dc

6. 10dc, (3dc single loop)*2, 10dc, (3dc single loop)*2, 18dc, (3dc single loop)*2, 10dc, (3dc single loop)*2, 10dc

Tie around the cape with plush yarn, make two pompoms from the ball in 6sc into magic ring, pull off the ball and tie the strings.

Cap:

The width of the cap will have to be increased due to the hairstyle, so knit the increments in the cap further, according to the same principle, while trying on the cap on the head. Approximately 3-4 more rows of increases, and then according to the description of the cap.

The post Amigurumi Elf Noel Free Pattern appeared first on Amigurumi Patterns.