Amigurumi Little Bunny Materials:

Suitable yarn in two colors (used: YarnArt Dolce)

Matching crochet hook (used: 4.0 mm)

Safety eyes or half-beads (used: 8 mm)

Yarn or plastic safety nose for embroidery

Stuffing

Glue, needle, scissors

Abbreviations

(US Terms):

ch – chain

sc – single crochet

inc – increase (2 sc in the same stitch)

dec – decrease (sc 2 together)

dc – double crochet

sl st – slip stitch

2ch, 6sc – make 2 chains, 6 sc in second chain from the hook

Finished height without ears: approx. 17 cm

Lower Legs

(Make 2)

Stuff only the bottom part.

1: 2ch, 6sc in second ch from hook

2: 6inc = 12sc

3: 12sc

4: 4dec, 4sc = 8sc

5–9: 8sc

Fold and crochet through both edges 3–4 sc. Fasten off, cut the yarn. Make the second leg the same way.

Body + Head

Body and head are made as one piece. Stuff as you go.

1: 2ch, 6sc

2: 6inc = 12sc

3: (sc, inc)×6 = 18sc

4: (2sc, inc)×6 = 24sc

5: (3sc, inc)×6 = 30sc

Next round: attach legs.

2: Continue

6: 3sc with leg, 12sc, 3sc with second leg, 12sc = 30sc

Next round: make the tail (can be crocheted separately and sewn on later). You may place a marker at the end of the round if needed.

7: sc in each st around; where the tail goes: 5dc in one st with a shared top (bobble tail). Finish the round = 30sc

(If sewing tail separately, simply make 30sc in this round.)

8: 30sc (switch to sweater color if desired)

9–11: 30sc

12: (3sc, dec)×6 = 24sc

13: (2sc, dec)×6 = 18sc

14: 18sc

15: (sc, dec)×6 = 12sc

Continue with head.

3: Continue

Switch to main color.

16: 12inc = 24sc

17: (3sc, inc)×6 = 30sc

18: (4sc, inc)×6 = 36sc

19–22: 36sc

23: (4sc, dec)×6 = 30sc

24: (3sc, dec)×6 = 24sc

25: 24sc

26: (2sc, dec)×6 = 18sc

27: (sc, dec)×6 = 12sc

28: 6dec

Fasten off and cut yarn.

Upper Arms

(Make 2)

Stuff only the bottom part lightly.

1: 2ch, 5sc

2: 5inc = 10sc

3: 10sc

4: 2dec, 6sc = 8sc

5: 8sc – change color

6–8: 8sc

Fold and crochet through both edges 3sc

Amigurumi Little Bunny- Ears

(Make 2)

Do not stuff the ears.

1: 2ch, 6sc

2: 6inc = 12sc

3: (sc, inc)×6 = 18sc

4–5: 18sc

6: dec, 7sc, dec, 7sc = 16sc

7: dec, 6sc, dec, 6sc = 14sc

8: dec, 5sc, dec, 5sc = 12sc

9: dec, 4sc, dec, 4sc = 10sc

10: 10sc

Fasten off, leaving a long tail for sewing.

Amigurumi Little Bunny

Assembly and Finishing

Sew on the upper arms and ears.

Optionally, do facial sculpting (for eyes, mouth).

Glue on eyes and nose (or embroider if not using safety parts).

Embroider eyebrows, nose, and details if desired.

Your bunny is ready!

When publishing your finished toy, please credit the pattern author.

Your adorable bunny is now complete! We hope you enjoyed bringing this soft and cuddly friend to life. Whether it’s for a gift or your own collection, this little bunny is sure to bring a smile. Don’t forget to share your finished creation and credit the designer. Happy crocheting and see you in the next pattern!

The post Amigurumi Little Bunny Free Pattern appeared first on Amigurumi Patterns.

Best Bunny and bear- Recommended materials

1) Yarn for toys – microsuede in 1.5 mm bobbins

2) Yarn for decorating the face and for clothing:

Yarn Art Jeans N°01 for o-design of eyes, flower and jelly:

hearts on clothes;

No53 – for eyelashes and eyebrows;

No78 – dress and headband for a bear, nose for a bunny;

No75 – overalls for a bunny;

No70 – the bear’s nose.

3) Hook No.2

4) Filler

5) Eyes 10 mm;

6) Two buttons 10 mm;

7) A needle for stitching parts, a long needle for tightening the muzzle;

8) Scissors.

Let’s start knitting the Bunny and bear

Bear’s head

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) (1 sc, inc) x 6 (18)

4) (2 sc, inc) x 6 (24)

5) (3 sc, inc) x 6 (30)

6) (4 sc, inc) x 6 (36)

7) (5 sc, inc) x 6 (42)

8) (6 sc, inc) x 6 (48)

9) (7 sc, inc) x 6 (54)

10) (8 sc, inc) x 6 (60)

11) (9 sc, inc) x 6 (66)

12) – 24) 66 sc (13 rows)

We insert the eyes between rows 17 and 18 at a distance of 11 sc

25) (9 sc, dec) x 6 (60)

26) (8 sc, dec) x 6 (54)

27) (7 sc, dec) x 6 (48)

28) (6 sc, dec) x 6 (42)

29) (5 sc, dec) x 6 (36) We begin to fill the head

30) (4 sc, dec) x 6 (30)

31) (3 sc, dec) x 6 (24)

Cut the thread and hide the end.

Bunny’s head

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) (1 sc, inc) x 6 (18)

4) (2 sc, inc) x 6 (24)

5) (3 sc, inc) x 6 (30)

6) (4 sc, inc) x 6 (36)

7) (5 sc, inc) x 6 (42)

8) (6 sc, inc) x 6 (48)

9) (15 sc, inc) x 3 (51)

10) 8 sc, inc, (16 sc, inc) x 2, 8 sc (54)

11) (17 sc, inc) x 3 (57)

12) 9 sc, inc, (18 sc, inc) x 2, 9 sc (60)

13) – 18) 60 sc (6 rows)

19) (9 sc, inc) x 6 (66)

20) – 25) 66 sc – 6 rows

We insert the eyes between rows 17 and 18 at a distance of 11 sc

25) (9 sc, dec) x 6 (60)

26) (8 sc, dec) x 6 (54)

27) (7 sc, dec) x 6 (48)

28) (6 sc, dec) x 6 (42)

29) (5 sc, dec) x 6 (36) We begin to fill the head

30) (4 sc, dec) x 6 (30)

31) (3 sc, dec) x 6 (24)

Cut the thread, hide the end

Body (the same for a bunny and a bear)

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) (1 sc, inc) x 6 (18)

4) (2 sc, inc) x 6 (24)

5) (3 sc, inc) x 6 (30)

6) (4 sc, inc) x 6 (36)

7) (5 sc, inc) x 6 (42)

8) (6 sc, inc) x 6 (48)

9) (7 sc, inc) x 6 (54)

10) (8 sc, inc) x 6 (60)

11) We knit the lower legs: 12 sc, 6 sc together with the first leg, 24 sc, 6 sc together with the second leg, 12 sc (60)

12) – 15) 60 sc (4 rows)

16) (8 sc, dec) x 6 (54)

17) – 18) 54 sc – 2 rows

19) (7 sc, dec) x 6 (48)

20) 48 sc

21) (14 sc, dec) x 3 (45)

22) 6 sc, dec, (13 sc, dec) x 2, 7 sc (42)

23) 42 sc

24) (12 sc, dec) x 3 (39)

Let’s start filling

25) 5 sc, dec, (11 sc, dec) x 2, 6 sc (36)

26) (10 sc, dec) x 3 (33)

27) 4 sc, dec, (9 sc, dec) x 2, 5 sc (30)

28) (8 sc, dec) x 3 (27)

29) We knit the upper legs. There is no need to count here, the main thing is that the upper legs must be strictly symmetrical to the lower ones. The distance between the upper legs in front is 8 sc, in the back – 11 sc.

30) (7 sc, dec) x 3 (24)

31) 24 sc, cut the thread, leave the tip for sewing

Lower paws (the same for a bunny and a bear)

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) (1 sc, inc) x 6 (18)

4) (2 sc, inc) x 6 (24)

5) – 7) 24 sc – 3 rows

8) 4 sc, 8 dec, 4 sc (16)

9) 6 sc, 2 dec, 6 sc (14)

We begin to fill (I fill only to the middle of the leg)

10) – 19) 14 sc – 10 rows

Additionally, we knit 2 sc offsets, fold in half and knit 6 sc on both walls. We cut off the thread and hide the tip inside the leg.

Upper paws (the same for a bunny and a bear)

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) (5 sc, inc) x 2 (14)

4) – 6) 14 sc – 3 rows

7) (5 sc, dec) x 2 (12)

8) (4 sc, dec) x 2 (10)

Fill the top foot only up to the 8th row

9) – 14) 10 sc – 6 rows

Additionally, we knit 2 sc offsets, fold in half and knit 4 sc on both walls. We cut off the thread and hide the tip inside the leg.

Bear’s ears

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

  2) 6 inc (12)

3) (1 sc, inc) x 6 (18)

4) – 6) 18 sc – 3 rows

Fold together, knit 8 sc on both sides. Cut the thread, leave the tip for sewing.

Bunny ears

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) 12 sc

4) (3 sc, inc) x 3 (15)

5) 15 sc

6) (4 sc, inc) x 3 (18)

7) 18 sc

8) (5 sc, inc) x 3 (21)

9) – 14) 21 sc – 6 rows

15) (5 sc, dec) x 3 (18)

16) (4 sc, dec) x 3 (15)

Fold in half, knit 7 sc on both sides. Fold in half again and use a needle to sew with a few stitches. Cut the thread, leave the tip for sewing.

Tail (the same for a bunny and a bear)

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) (1 sc, inc) x 3 (9)

3) 9 sc

Fold, knit 4 sc on both sides. Cut the thread, leave the tip for sewing.

Bear’s muzzle (knitted from micro velor)

1) 2 ch (chain loops), 6 sc in the 2nd loop from the hook, sl-st (6)

2) 6 inc (12)

3) (1 sc, inc) x 6 (18)

4) (2 sc, inc) x 6 (24)

5) 24 sc, sl-st

Cut the thread, leave the tip for sewing

Assembly

1) Sew the head to the body loop to loop (24 loops left b In the last row of the head and the same amount in the last row of the body, which means we make 24 stitches). In the process, fill the neck area well.

2) We do eye tightening (similar to all my other master classes). Attention! It is better to tighten with Yarn Art Jeans thread of a suitable shade, since the micro-suede may tear;

3) Sew on the muzzle of the bear at the level of 18 – 26 rows of the head (do not fill it). Embroider the nose;

4) We embroider the bunny’s nose at the level of 18-20 rows of the head; 5) We shape the eyebrows (at the level of the 11th row of the head), eyelashes and whites of the eyes;

6) Sew on the ears (for a bunny – between 5-7 rows of the head, for a Bear – between 7-13 rows of the head);

7) Sew the tail between the 11th and 12th rows of the body

Dress for a bear

1) Dial 23 ch. Next we knit in turning rows, starting each new row with 1 ch

2) From the 2nd loop from the hook we knit 22 sc (22)

3) 2 sc, inc, 16 sc, inc, 2 sc (24)

4) (2 sc, inc) x 8 (32)

5) Form the sleeves: 2 sc, inc, 3 sc, 5 ch, skip 5 loops, insert the hook into the buoy, 2 sc, inc, 4 sc, inc, 2 sc, 5 ch, skip 5 loops, insert the hook into the buoy, 3 sc, inc, 2 sc (36)

6) – 9) 36 sc – 4 rows

10) Forming the skirt: 36 inc (72)

11) – 16) 72 sc – 6 rows

17) We tie the edge: 1 ch, 1 sl-st in the next loop – to the end of the row.

We do not cut the thread, we sew the dress from the back at the level of 11-16 rows. At the back of the neck we make ties (36 ch each) or a loop with a button.

Bow

Dial 13 ch. Next we knit in turning rows, starting each new row with 1 ch: 6 rows of 12 sc.

We tie a sc bow around the entire perimeter. Cut the thread and hide the end. We make a jumper and a rim (a chain of ch). Sew the bow to the headband.

Flower on the dress

We knit an amigurumi ring: (1 ch, 2 hdc, 1 ch, sl-st in MR) – 3 times. We tighten it.

Bunny overalls

1) Dial 45 ch, connect in a circle. Next we knit in circles

2) – 9) 8 rows of 44 sc

10) Make a hole for the ponytail: 42 sc (we don’t add 2 sc)

11) Make 4 ch, skip 4 loops, insert the hook into the 5th and knit 42 sc

12) – 17) 44 sc – 6 rows

Forming the trouser legs. For each trouser leg – 22 sc. We count 22 sc, insert the hook into the 23rd, knit 3 rows of 22 sc. We cut off the thread, bend the trouser leg and fix it with the remaining tip using a needle with several stitches. We knit the second leg in the same way.

Straps: 23 ch, from the 2nd loop from the hook we knit 22 sc

heart

We knit in MR: 3 ch, 2 double crochets, 3 single crochets, 1 ch, 1 double crochet, 1 ch, 3 single crochets, 2 double crochets, 3 ch, sl-st in ka. We tighten

The post Best Bunny and bear Free Amigurumi Pattern appeared first on Amigurumi Patterns.

In this free amigurumi pattern, you’ll find easy-to-follow instructions, including a list of materials, stitch explanations, and helpful tips to ensure your bunny turns out just right. Whether you’re new to amigurumi or a seasoned pro, this Bunny Dashik pattern is designed to be enjoyable and rewarding.

Start your crochet journey with Bunny Dashik today and bring a touch of handmade charm into your home!

Materials:

– Himalaya dolphin yarn beige, white, pink (for the nose)

-hook #4

-filler

– 2 beads for eyes

-needle and thread for stitching parts

When using these materials, the toy is 37 cm.

Designations:

MR- amigurumi ring

Ch – air loop

Sc – single crochet

İnc – increase

Dec – decrease

Head-body

We knit with beige yarn. We pick up as we knit.

We collect a chain of 9Ch+1Ch. Starting from the second loop

1. 1İnc, 7Sc, 3 Sc in the last loop, on the other side of the chain 8Sc (20)

2. 2İnc, 7 Sc, 3İnc, 7 Sc, 1İnc (26)

3. (1Sc, 1İnc) *2, 7 Sc, (1Sc, 1İnc)*3, 8Sc, 1İnc (32)

4. (2Sc, 1İnc) *2, 7 Sc, (2Sc, 1İnc)*3, 9Sc, 1İnc (38)

5. (3Sc, 1İnc) *2, 7 Sc, (3Sc, 1İnc)*3, 10Sc, 1İnc (44)

6-7. 44Sc

8. 6Sc, 1Dec, (9Sc, 1Dec)*3, 3Sc (40)

9.40Sc

10. 6Sc, 1Dec, (8Sc, 1Dec)*3, 2Sc (36)

11.36Sc

12. 5Sc, 1Dec, (7Sc, 1Dec)*3, 2Sc (32)

13.32Sc

14. 5Sc, 1Dec, (6Sc, 1Dec)*3, 1Sc (28)

15.28Sc

16. (5Sc, 1Dec)*4 (24)

17.24Sc

18. (2Sc, 1Dec)*6 (18)

19. (1Sc, 1Dec)*6 (12)

20. 6Dec

Tighten the hole. Hide the thread.

Legs (2 parts)

Bottom of the shoe. We start with beige yarn.

1. Dial 2Ch. In the first loop we knit 6Sc

2. 6İnc. (12)

3. (3Sc, 1İnc)*3 (15)

4-8. 15Sc

Stuffing part 9. (3Sc, 1Dec)*3 (12)

10.6Dec

Tighten the hole. Hide the thread.

Upper part of the shoe.

We don’t stuff!

1. On the resulting piece we knit 15Sc, forming a circle. We do not cut the thread.

We knit white yarn behind the back half-walls

2. (3Sc, 1Dec)*3 (12)

3. (2Sc, 1Dec)*3 (9) 4-12. 9Sc

Fold the piece in half and knit 4Sc in both loops. Leave the thread for sewing.

We return to the first row and knit the top of the shoe with beige yarn

2. for the front half-walls we knit 15Sc

3-4. 15Sc Fasten and hide the thread.

Handles (2 children)

We knit with beige yarn. We don’t stuff.

1. Dial 2Ch. In the first loop we knit 6Sc

2. 6İnc. (12)

3-6. 12Sc.

Fasten the thread and leave a long end for sewing.

Ears (2 children)

We knit with white yarn. We don’t stuff.

1. Dial 2Ch. In the first loop we knit 6Sc

2. 6İnc. (12)

3. 12Sc

4. (3Sc, 1İnc)*3 (15)

5-18. 15Sc

Fasten the thread and leave a long end for sewing.

Tail

We knit with white yarn. We don’t stuff.

1. Dial 2Ch. In the first loop we knit 6Sc

2. 6İnc. (12)

3. (3Sc, 1İnc)*3 (15)

4-5. 15Sc

6. (3Sc, 1Dec)*3 (12)

Fasten the thread and leave a long end for sewing.

Eyes (2 children)

We knit with white yarn

1. Dial 2Ch. In the first loop we knit 8Sc

2. 8İnc. (16)

Fasten the thread and leave a long end for sewing.

Spout

We knit with pink yarn. We dial 2Ch. We knit 4Sc into the first loop

Fasten the thread and leave a long end for sewing.

Assembly.

Sew on all the details.

The legs are sewn between rows 1 and 2.

The post Amigurumi Bunny Dashik Free Pattern appeared first on Amigurumi Patterns.

Amigurumi, the Japanese art of knitting or crocheting small stuffed animals and anthropomorphic creatures, has gained popularity worldwide for its whimsical designs and endless customization possibilities. With this free pattern, you’ll have the opportunity to bring your own Velvet Bunny Ella to life, adding your personal touch with choice of colors and embellishments.

Materials:

-Himalaya Dolphin Baby – less than 1 skein

-4 mm crochet hook

-Safety eyes 10 mm

-Yarnart Jeans 53 (or any other black cotton yarn) for head decoration

-Yarnart Jeans 36 (or any other pink cotton yarn) for head decoration

-Toy stuffing material

-Sewing needle, scissors

-Stitch Markers

The height of the toy is approximately 20 cm.

Amigurumi Abbreviations:

Magic Ring – MR

inc – increase

Sc-single crochet

dec decrease

Ears

1. 6 sc in MR (6)

2. (1 sc, inc)*3 (9)

3. 9 sc (9)

4. (2 sc, inc)*3 (12)

5. (3 sc, inc)*3 (15)

6-8.15 sc (15)

9. (3 sc, dec)*3 (12)

10. 12 sc (12)

Fold in half and crochet 6 sc through both sides

Leave long tail for seving.

Legs

1. 6 sc in MR

2. (inc)*6 (12)

3. (1 sc, inc)*6 (18)

4. (5 sc, inc)*3 (21)

5-6. 21 sc (21)

7. 1 sc, (1 sc, dec)*6, 2 sc (15)

8. 3 sc, (1sc, dec)*3, 3 sc (12)

9-13. 12 sc (12)

Fold in half and crochet 5 sc through both sides

Head

1. 6 sc in MR (6)

2. (inc)*6 (12)

3. (1 sc, inc)*6 (18)

4. (2 sc, inc)*6 (24)

5. (3 sc, inc)*6 (30)

6. 30 sc (10)

7. (4 sc, inc)*6 (36)

8-12.36 sc (36)

Insert safery eyes between rounds 8 and 9, 6 stitches apart

13. (4 sc, dec)*6 (30)

14. (3 sc, dec)*6 (24)

15. (2 sc, dec)*6 (18)

16. (1 sc, dec)*6 (12) 17. (dec)*6 (6)

Arms

1. 6 sc in MR

2. (inc)*6 (12)

3-4. 12 sc (12)

5. 3 dec, 6 sc (9)

6-12.9 sc (9)

Fold in half and crochet 4 sc through both sides

Body

1. 6 sc in MR (6)

2. (inc)*6 (12)

3. (1 sc, inc)*6 (18)

4. (1 sc, inc)*9 (27)

5. (2 cóн, inc)*9 (36)

6. 36 sc (36)

7. 5 sc with leg, 12 sc, 5 sc with leg, 14 sc (36)

8.36 sc (36)

9. (2 sc, dec) x9 (27)

10. 27 sc (27)

11. (1sc, dec) x9 (18)

12-13. 18sc (18)

14. (4sc, dec) x3 (15)

15. 1 sc, 4 sc with hand, 4 sc, 4 sc with hand, 2 sc (you may

have a different offset of the loops, so make sure that the feet are knitted symmetrically)

Leave long tail for seving

The post Free Velvet Bunny Ella Amigurumi Pattern appeared first on Amigurumi Patterns.

Amigurumi, the Japanese art of knitting or crocheting small stuffed animals and anthropomorphic creatures, has gained immense popularity among crafters worldwide. Whether you’re a seasoned crocheter or just starting out, this Fat Bunny Amigurumi pattern is perfect for all skill levels.

Materials:

Cotton yarn (50 g/200 m) +Black and Pink

thread for eyebrows, mouth.

2 mm crochet hook

10 mm safety eyes

Fiberfill

Tapestry needle

Scissors

Safety pins

When using these materials, the height of the toy is from 20 cm. It all depends on your knitting density and the chosen yarn.

Abbreviation:

-MR: Magic ring.

-Rnd: Round.

-Sc: Singer crochet.

-Inc: Singer crochet increase (2 sc in one stitch)

-Dec: Singer crochet decrease (make 2 stitches in one stitch).

-Sts: Stitches.

-BLO: Back loop only.

-Hdc: Half double crochet.

-Sist: Slip stitch.

Eyes (6mm), please put the eyes at rnd 24.

Head:

1)6 sc in MR

2)inc * 6 (12)

3)(1 sc, inc)x6 (18)

4)(2 se, inc)x6 (24)

5)(3 sc, inc)x6 (30)

6)(4 sc, inc)x6 (36)

7)(5 sc,inc)x6 (42)

8)(6 sc, inc)x6 (48)

9)48 sc

10)(7 sc, inc)x6 (54)

11-16) 54 sc (6 round)

17)20 sc, 5 inc, ,4 sc, 5 inc, 20 sc (64)

18-24)64 sc (7 round)

25) (7 sc, dec)x7, 1 sc (57)

26) (6 sc, dec)x7, 1 sc (50)

27)(5 sc, dec)x7, 1 sc (43)

28) (4 sc, dec)x7, 1 sc (36)

29)(4 sc, dec)x6(30)

30) (3 sc, dec)x6(24)

31)(6 sc, dec)x3(21)

Fasten off leaving a long yarn tail for sewing.

Stuff as you go.

Body:

1):6 sc in MR

2):6 inc (12)

3): (1 sc, inc)x6 (18)

4): (2 sc, inc)x6 (24)

5): (3 sc, inc)x6 (30)

6):(4 sc, inc)x6 (36)

7): (5 sc, inc)x6 (42)

8):(6 sc, inc)x6 (48)

9):(7 sc, inc)x6 (54)

10-18):54 sc (8 round)

19):(7 sc, dec)x6 (48) 20):48 sc

21): (6 sc, dec)x6 (42)

22):42 sc

23): (5 sc, dec)x6 (36)

24-25): 36 sc

26):(10 sc, dec)x3 (33)

27):33 sc

28):(9 sc, dec)x3 (30)

29):30 sc

30): (8 sc, dec)x3 (27)

31):27 sc

32):(7 sc, dec)x3 (24)

33): 24 sc

34):(6 sc, dec)x3(21)

Fasten off and leave a long tail for sewing.

Arms:

1)7 se in MR

2)7 inc (14)

3)(1 sc, inc)x7 (21)

4-5)21 sc (2 round)

6)7 sc,3 dec,8 sc (18)

7-8)18 sc (2 round)

9)(4 sc, dec)x3 (15)

10)15 sc

11)(3 se, dec)x3

(12) 12-20)12 sc(9 round)

Crochet 2 sc, stuff the arm halfway, fold the arm in half and crochet together 5 sc. Leave a long tail for sewing.

Legs:

1)7 sc in MR

2)7 inc (14)

3)(1 se,ine)x7 (21)

4)(2 se.inc)x7 (28)

5-6)28 sc (2 round)

7)4 sc, (dec,2 sc)x5, 4 sc (23)

8)6 sc,5 dec,7 sc (18)

9)8 sc, dec,8 sc (17)

10-22)17 sc (12 round)

Stuff the leg halfway, fold in half and crochet together 7 sc. Leave a long tail for sewing

Ears:

1)6 se in MR

2)6 inc (12)

3)12 sc

4)(1 sc,inc)x6 (18)

5)18 sc

6)(2 sc,inc)x6 (24)

7)24 sc

8)(3 sc, inc)x6 (30)

9)30 sc

10-24)30 sc (14 round)

25)(8 sc, dec)x3 (27)

26)27 sc

27) (7 sc, dec)x3 (24)

28)24 sc

29)(6 sc, dec)x3 (21)

30)21 sc

31)(5 sc, dec)x3 (18)

32)18 sc

33-4

6) 18 sc (14 round)

Fold the ear in half and sew both side together. Leave a long tail for sewing.

Assembly:

Sew the arms in rounds 32-33 so that there are 9 se between them.

Sew the legs in rounds 12-13 so that there are 22 se between them

Sew the ears in rounds 6-7 so that there are 18 sc between them.

The post Free Fat Bunny Amigurumi Pattern appeared first on Amigurumi Patterns.

Necessary materials:

1) YarnArt Jeans (160 m / 50 g) – color 05 (for the bunny herself)

• color 83 (for overalls and bow)
• a little black yarn to decorate the face (eyelashes, eyebrows, nose)
  2) Hook
  3) Filler
  4) Eyes 6 mm
  5) Needle, marker, scissors

Abbreviations

MR – amigurumi ring.

Ch – air loop.

Sc – single crochet.

Dc – single crochet

Dec – decrease.

İnc – increase.

HDC – half double crochet.

Sl-st – connecting post.

Head

1) 6 Sc in MR

2) 6 increments (12)

3) (1 Sc, İnc)*6 (18)

4) (2 Sc, İnc)*6 (24)

5) (3 Sc, İnc)*6 (30)

6) (4 Sc, İnc)*6 (36)

7-8) 36 Sc

9) (5 Sc, İnc)*6 (42)

10-11) 42 Sc

12) (6 Sc, İnc)*6(48)

13-17) 48 Sc

17) (6 Sc, Dec)*6 (42)

18) (5 Sc, Dec)*6 (36)

19) (4 Sc, Dec)*6 (30)

20) (3 Sc, Dec)*6 (24)

21) (2 Sc, Dec)*6 (18)

We insert the eyes between rows 14 and 15, the distance between the eyes is 8 Sc. Make SL-ST, cut off

thread and hide the end in the head

Ears (do not fill with filler)

1) 6 Sc in MR

2) (1 Sc, İnc)*

3 (9) 3) 9 Sc

4) (2 Sc, İnc)*3 (12)

5) 12 Sc

6) (3 Sc, İnc)*3 (15)

7) 15 Sc

8) (4 Sc, İnc)*3 (18)

9-15) 18 Sc

16) (4 Sc, Dec)*3 (15)

Fold in half and knit 7 Sc on both sides. Leave the thread for sewing

Legs

We start knitting from the right leg

1) 6 Sc in MR

2) 6 increments (12)

3) (5 Sc, İnc)*2 (14)

4-36) 14 Sc Make SL-ST, cut thread

Left leg

1) 6 Sc in MR

2) 6 increments (12)

3) (5 Sc, İnc)*2 (14)

4-36) 14 Sc

Next we will connect

two legs together, for this we make 4 Ch and attach the right leg, knitting 36 Sc

Torso

We continue to knit another 9 rows of 36 Sc (a total of 10 rows of 36 Sc)

11) (16 Sc, Dec)*2 (34)

12) (15 Sc, Dec)*2 (32)

13-14) 32 Sc

15) (14 Sc, Dec)*2 (30)

16) (13 Sc, Dec)*2 (28)

17-18) 28 Sc

19) (12 Sc, Dec)*2 (26)

20) (11 Sc, Dec)*2 (24)

21-22) 24 Sc

23) (6 Sc, Dec)*3 (21)

24) 21 Sc

25) (5 Sc, Dec)*3 (18)

26) 18Sc

Make SL-ST, and leave a long end for sewing on the head

Handles (do not fill with filler)

1) 4 Sc in MR

2) 4 increments (8)

3) (3 Sc, İnc)*2 (10)

4-20) 10 Sc Fold in half and knit 4 Sc. Leave the thread for sewing

Assembly Sew the head to the body using 18 Sc Handles are sewn between rows 25 and 26 Ears are sewn on approximately row 3 Make the design of the muzzle (embroider eyelashes, eyebrows)

Overalls

Let’s start knitting

jumpsuit with trousers. First leg – cast on 24 Ch, join in a circle, and knit 29 rows of 24 Sc, fasten and cut the thread.

Second leg – knit similarly

first, only at the end we don’t cut the thread, but cast on 2 Ch and attach the first leg, knit 52 Sc four rows. Next we knit along the next line.

diagram:

6. 11 Sc, Dec, 24 Sc, Dec, 13 Sc (50)

7. 10 Sc, Dec, 24 Sc, Dec, 12 Sc (48)

8. 10 Sc, Dec, 22 Sc, Dec, 12 Sc (46)

9. – 10) 46 Sc

11. 10 Sc, Dec, 21 Sc, Dec, 1 Sc (44) 12. 44 Sc

13. (20 Sc, Dec)*2 (42) 14. (19 Sc, Dec)*2 (40) 15. (18 Sc, Dec)*2 (38) 16. (17 Sc, Dec)*2 ( 36) Make SL-ST and cut the thread

Mark the middle of the overalls, attach a thread and knit 4 rows of 10 Sc, each row starts with I CH

Straps. We cast on 28 Ch and sew them to the overalls. We hide all the threads that stick out. The overalls are ready.

Bow. We do MR, but don’t delay!!!

We type 4 Ch, then we make 4 columns with two throws, then again 4 Ch, and a connecting column into an amigurumi ring. Track. The side of the bow is knitted similarly.

Then tighten the ring and you get a bow.

The post Free Rabbit in overalls Amigurumi Pattern appeared first on Amigurumi Patterns.

Come on, get your knitting needles ready and start creating your dream dress for a cute bunny! This special knitting project will not only showcase your talents, but also offer a unique way to show your love to your loved ones.

Necessary materials:

Bunny yarn (I used Alize Cotton Gold No. 728 for Louis, YarnArt Jeans No. 76 for G). For pants (I used Alize Cotton Gold No. 612 for Louis, Alize Cotton Gold No. 518 for Gee).

For the face (I used Alize Cotton Baby Soft No. 55).

For tying panties (YarnArt Jeans No03) Black thread for decorating the muzzle White thread for decorating the eyes Eyes on a safe 8 mm fastening

2 mm hook, sewing needle Scissors, marker

Filler

Yarn consumption:

Primary color 45 gr

For panties and bow 6-7 g For muzzle 2 g

For tying panties 2-3 g Description!

Abbreviations

MR – amigurumi ring

CH – air loop

Sc – single crochet

İnc – increase

Dec – decrease

sl-st – slip stitch

hdc – half double crochet. 

Pens:

1. 6 SC V MR (6)

2.6 İNC (12)

3. (1 SC, İNC)*6 (18)

4.-5. 18 SC each (2 rows)

6. (1 SC, DEC)*6 (12)

7. 3 SC, 3 DEC, 3 SC (9)

8.-20. 9 SC each (13 rows) Stuff the handle up to the 8th row. Make offset loops or leave a few loops unknitted so that the handle points inward (as in the photo).

21. Fold the handle in half and tie 4 SC.

Cut the thread and hide the end.

Legs:

1. 6 SC V MR (6)

2.6 İNC (12)

3. (1 SC, İNC) *6 (18)

4. (2 SC, İNC) *6 (24)

5. (3 SC, İNC) *6 (30)

6.-7. 30 SC each (2 rows)

8. 6 SC, (1 SC, DEC) *6, 6 SC (24)

9. 6 SC, 6 DEC, 6 SC (18)

10.18 SC

11. (1 SC, DEC) *6 (12)

12.-14. 12 SC each (3 rows)

15. (3 SC, İNC) *3 (15)

16.-21. 15 SC each (6 rows) Stuff the leg completely. On the first leg we don’t knit a few loops so that the beginning of the row is on the side, but closer to the center (the Bunny’s clubfoot will depend on this). On the second leg we do the opposite, we knit offset loops

We cut off the thread on the first leg, not on the second, and continue to knit the body.

Body:

On the second leg we dial 4 Ch, connect it to 1 leg and knit further:

The beginning of the row will be at the back, on the back. We stuff the body as we knit.

1. 15 SC per leg, 4 SC per Ch, 15 SC per leg, 4 SC per Ch (38)

2. 15 SC, (1 SC, İNC) *2, 15 SC, (1 SC, İNC) *2 (42)

3. (6 SC, İNC) *6 (48)

4.48 SC

5. (7 SC, İNC) *6 (54)

6. – 12. 54 SC each (7 rows)

13. (7 SC, DEC) *6 (48)

14.48 SC

15. (6 SC, DEC) *6 (42)

16. – 17. 42 SC each (2 rows)

18. (5 SC, DEC) *6 (36)

19.-20. 36 SC each (2 rows)

21. (4 SC, DEC) *6 (30)

22. (3 SC, DEC) *6 (24)

The beginning of the row should be exactly in the middle of the back.

We knit the handles:

23. 4SC, 4 SC with handle, 8 SC, 4 SC with handle, 4 SC (24)

24. (2 SC, DEC) *6 (18)

25. 18 SC, do not cut the thread, but continue to knit the head.

Head:

Stuff as you knit.

1. (2 SC, İNC) *6 (24)

2. (3 SC, İNC) *6 (30)

3. (4 SC, İNC) *6 (36)

4. (5 SC, İNC) *6 (42)

5. (6 SC, İNC) *6 (48)

6. (3 SC, İNC) *12 (60)

7. (9 SC, İNC) *6 (66)

8. (10 SC, İNC) *6 (72)

9.-11. 72 SC each (3 rows)

12. (4 SC, DEC) *12 (60)

13. – 14. 60 SC each (2 rows)

15. (8 SC, DEC) *6 (54)

16.54 SC

We make offset loops so that the beginning of the row is exactly in the middle of the back.

17. 25 SC, 1 Ch, 1 SC skip, 2 SC, 1 Ch, 1 SC skip, 25 SC (54)

In this row we will insert eyes.

18. (7 SC, DEC) *6 (48)

19.-20. 48 SC each (2 rows)

21. (6 SC, DEC) *6 (42)

22. (5 SC, DEC) *6 (36) Insert eyes.

23. (4 SC, DEC) *6 (30)

24. (3 SC, DEC) *6 (24)

25. (2 SC, DEC) *6 (18)

26. (1 SC, DEC) *6 (12)

27. 6 DEC (6)

Muzzle:

1. 6 SC V MR (6)

2.6 İNC (12)

3. (1 SC, İNC) *6 (18)

4. (2 SC, İNC) *6 (24)

5. (6 SC, 6 İNC) *2 (36)

6.-7. 36 SC each (2 rows),

leave the thread for sewing.

Sew the muzzle 1 row below the eyes. We don’t stuff the face. Decor:

We make a small tightening of the eyes (if you want).

We embroider the nose with black thread, retreating 2 rows down.

Spout size (distance in length 5-6 loops and 3 rows down).

We embroider a smile, eyelashes and eyebrows (as in the photo).

Ears:

1.6 SC V MR (6)

2.6 SC (6)

3.6 İNC (12)

4. – 5. 12 SC each (2 rows)

6. (1 SC, İNC) *6 (18)

7. 18 SC

8. (2 SC, İNC) *6 (24)

9.-10. 24 SC each (2 rows)

11. (3 SC, İNC) *6 (30)

12. – 16. 30 SC each (5 rows)

17. (3 SC, DEC) *6 (24)

18. – 20. 24 SC each (3 rows)

21. (2 SC, DEC) *6 (18)

22.-24. 18 SC each (3 rows)

Fold the eyelet in half and tie 9 SC, fold it again and stitch with thread. Leave the thread for sewing. Sew on the ears.

We sew one ear near the center of the head, the second ear next to it (but we sew it, grabbing

most of the ear, so that the ear seems to lie on the head).

Knitting panties: (Dress)

We cast on an even number of loops.

I dialed 50 Ch.

We connect it into a ring.

We knit the first row in the lower half loops of a chain of CH. (As in the photo) – this is so that the edge is smooth.

We knit 12 rows of 50 SC.

(You can knit more rows).

Divide in half into 2 pant legs.

In each leg we knit 5 rows of 25 SC.

Leave the thread longer, about 30 cm.

We bend each pant leg and stitch it. We knit the straps.

In the middle of the pants we mark 11 SC and knit. When we knit the first row, we knit the loops behind the SC of the 1st row of panties (as in the photo below)

(11 SC, 1 Ch, turn) *3, 11 SC, 1 Ch. We don’t cut the thread, we knit a strap: (2 SC, 1 Ch, turn)

16 rows, leaving thread for sewing. We knit the second strap in the same way.

Sew on the straps.

Making the strapping: (Dress)

Left strap: (start at the back) tie it with 20 Sc (as shown in the photo), 1 Ch, turn. (4 DC V 1 loop, 2 SC) *6.4 DC V 1 loop, 1 SC, fasten and cut thread.

Right strap: (start from the front) we tie it 20 SC, 1 Ch, turn.

1 SC, 4 DC in 1 loop, (2 SC, 4 DC in 1 loop) *6.

Fasten the thread and cut it. Knitting a bow:

In MR we dial 1 SC +3 CH, 4 CC2H, 4 CH and do SL-ST in MR, 4 CH, 4 CC2H, 4 CH and do SL-ST in MR. MR tighten.

Wrap the thread around the middle of the bow several times, leaving the thread for sewing. We collect a chain for the bow.

The post Crochet Free Bunny in dress Pattern appeared first on Amigurumi Patterns.

This original design comes with a detailed set of instructions that clearly explains each step and covers basic knitting techniques. You can also feel creative and personalize the colors or patterns.

Required materials and tools:

• Yarn Alize Cotton Gold / YarnArt Jeans / Alize Cotton Gold Hobby / Gazzal Baby Cotton: in 50 g -165 / 170 m.
• Thread for embroidery of the nose, eyelashes, eyebrows (I have Alize Forever simli).
• Hook – 1.75 / 2 mm.
• Eyes – 12 mm.
• Ribbon for decoration – 25 cm.
• Filler.
• Needle, scissors, marker.

Leg (2 pcs.)

White color

1. İNTO MAGİC RİNG 2 ch + 6 sc = 6 sc.

2.6 inc = 12 sc.

3. (1 sc + inc) * 6 = 18 sc.

4. (2 sc + inc) * 6 = 24 sc.

5.24 sc.

grey colour

6-17. 24 sc. (12 rows)

• we tie sc in a row so that the “clove” transition from white to gray is flush with the loop

• cut the thread on the first leg, not on the second

Body

connect the legs:

18.2 sts, attach the second leg and knit sc in a circle = about 54 sc: 24 sc one leg at a time, 3 sc between the legs (so that there are no holes, we knit not 2 sc out of 2 ch, but one more on the side), 24 sc along the second leg, 3 sc between the legs.

19-23. 54 sc. (5 rows)

 fill the legs with holofiber

white color_1

24.54 sc.

grey colour

25.54 sc.

white color_2

26.54 sc.

grey colour

27.54 sc.

white color_3

28.54 sc.

grey colour

29.54 sc.

white_4

30.54 sc.

grey colour

31.54 sc.

white color_5

32.54 sc.

grey colour

33.54 sc.

white color_6

34.54 sc.

grey colour

35.54 sc.

white_7

36.54 sc.

grey colour

37. (7 sc + dec) * 6 = 48 sc.

White color

38.48 sc.

grey colour

39. (6 sc + dec) * 6 = 42 sc.

White color

40.42 sc.

grey colour

41. (5 sc + dec) * 6 = 36 sc.

42. (4 sc + dec) * 6 = 30 sc.

43. (3 sc + dec) * 6 = 24 sc.

 1 ch, cut the thread, fill the body with holofiber

A pen

White color

1. İNTO MAGİC RİNG 2 ch + 6 sc = 6 sc.

2.6 inc = 12 sc.

3. (1 sc + inc) * 6 = 18 sc.

4-5. 18 sc.

grey colour

6-19. 18 sc. (14 rows)

20. (1 sc + dec) * 6 = 12 sc.

21-23. 12 sc (3 rows).

 fill with holofiber not to the end

 fold in half, tie together with single crochet

Head

1. İNTO MAGİC RİNG 2 ch + 6 sc = 6 sc.

2.6 inc = 12 sc.

3. (1 sc + inc) * 6 = 18 sc.

4. (2 sc + inc) * 6 = 24 sc.

5. (3 sc + inc) * 6 = 30 sc.

6. (4 sc + inc) * 6 = 36 sc.

7. (5 sc + inc) * 6 = 42 sc.

8. (6 sc + inc) * 6 = 48 sc.

9. (7 sc + inc) * 6 = 54 sc.

10. (8 sc + inc) * 6 = 60 sc.

11. (9 sc + inc) * 6 = 66 sc.

12. (10 sc + inc) * 6 = 72 sc.

13 – 26.72 sc. (14 rows)

insert eyes (12 mm) between 18 and 19 row at a distance of 9 or 10 visible columns

27. (10 sc + dec) * 6 = 66 sc.

28. (9 sc + dec) * 6 = 60 sc.

29. (8 sc + dec) * 6 = 54 sc.

30. (7 sc + dec) * 6 = 48 sc.

31. (6 sc + dec) * 6 = 42 sc.

32. (5 sc + dec) * 6 = 36 sc.

33. (4 sc + dec) * 6 = 30 sc.

34. (3 sc + dec) * 6 = 24 sc.

35-36. 24 sc (2 rows).

! We do cheek tightening, otherwise the head will look too big!

Eyelet (2 pcs.)

White color

1. İNTO MAGİC RİNG 2 ch + 4 sc = 4 sc.

2.4 inc = 8 sc.

3. (1 sc + inc) * 4 = 12 sc.

4. (2 sc + inc) * 4 = 16 sc.

5. (3 sc + inc) * 4 = 20 sc.

6. (4 sc + inc) * 4 = 24 sc.

7. (5 sc + inc) * 4 = 28 sc.

grey colour

8-27. 28 sc. (20 rows),

 finish the eyelet so that the color transition, “clove”, is on the side of the ear;

 fold in half, tie both halves together with single crochet;

 fold the eyelet in half again, sew the halves with a needle;

 we sew an eyelet between 5 and 6 near the center of the head (it is possible between 4 and 5 row) in a circle

We embroider the face

Tail

1. In the ring 2 ch + 6 sc.

2.6 inc = 12 sc.

3. (1 sc + inc) * 6 = 18 sc.

4. (2 sc + inc) * 6 = 24 sc.

5-6. 24 sc.

sew, fill, sew.

 decorate the bunny with a ribbon

 enjoy the result!

The post Crochet Striped bunny Free Pattern appeared first on Amigurumi Patterns.

These cute craft projects can be a great option, especially for beginner knitters. Moreover, starting with cute animal motifs like bunny figures is a perfect way to enter the world of knitting. Let’s start knitting our rabbit

Materials:

*Himalaya Dolphin Baby – less than 1 skein of pink and some white of the same yarn

*Fable Fur Yarnart – a little for a fluffy chest

*Hook – 4mm

*Safety eyes -14mm

*Safety spout – 10mm

*Black yarn or thread – to decorate the eyes

*Needle for stitching parts

*Padding material

The size of the finished toy is 20cm (including the use of recommended materials)

Abbreviations

Mr – amigurumi ring

Ch – air loop

Sc – single crochet

Sl-st- connecting post

İnc – increase

Dec – decrease

Head

1:8Sc to Mr (8)

2: 8İnc (16)

3: (1Sc, İnc)*8 (24)

4: (3Sc, İnc)*6 (30)

5: 2Sc, İnc, (4Sc, İnc)*5, 2Sc (36)

6: (5Sc, İnc)*6 (42)

7-9: 42Sc (42)

10: (5Sc, İnc)*6 (36)

11: 36Sc (36)

Insert safety eyes between rows 8 and 9 (distance between eyes 6-7Sc), insert safety spout between rows 8 and 9)

12: (4Sc, Dec)*6 (30)

Stuff as you knit

13: (3Sc, Dec)*6 24)

14: (2Sc, Dec)*6 (18)

15: (Sc, Dec)*6 (12)

16:6Dec (6)

Cut the thread

Pens:

We start knitting in white

1:6Sc to Mr (6)

2:6Sc (12)

3: 12Sc (12)

We continue to knit in pink

color

4:6Dec (6)

5-6: 6Sc (6)

Stuff the ends of the handles Fold the handle in half and knit 3Sc on both sides Cut the thread

Legs-body:

We start knitting in white

1:6Sc to Mr (6)

2: 6İnc (12)

3-4: 12Sc (12)

We continue to knit in pink

5-6: 12Sc (12)

Cut the yarn, we knit the second leg in the same way, but do not cut the yarn, we continue knitting

Attaching the legs:

7: We dial 2Ch, 12Sc on the first leg, 2Sc on the chain from Ch, 12Sc on the second leg, 2Sc on the chain from Ch (28)

8: (13Sc ,İnc)*2 (30)

9-10: 30Sc (30)

11: (4Sc, Dec)*5 (25)

12-13: 30Sc (30)

14: (3Sc, Dec)*5 (20)

15-16: 20Sc (20)

In the next row we will knit handles

17: 4Sc, 3Sc with handle, 6Sc, 3Sc with handle, 4Sc (20)

Stuff, leave thread for sewing

Tail:

1:6Sc to Mr (6)

2: 6İnc (12)

3: 12Sc (12)

Stuff a little, leave the thread for sewing

Ears:

We will knit in turning rows

1: Dial 6Ch

2: 5Sc, 1Ch (5)

3: 5Sc, 1Ch (5)

4: 2Sc, İnc, 2Sc, 1Ch (6)

5-9: 6Sc, 1Ch (6)

10: 2Sc, Dec, 2Sc, 1Ch (6)

11: 5Sc, 1Ch (6)

12: Sc, Dec, 2Sc, 1Ch (4)

13: 4Sc, 1Ch (4)

14:2Dec, 1Ch (2)

15:Dec

We do not cut the thread, we tie our part on 3 sides with single crochets. Click here to watch video

Breast

1:6Sc to Mr (6)

2: 6İnc (12)

3: (1Sc, İnc)*6 (18)

Leave the thread for sewing

Assembly:

Sew on the ears at row 11. Sew on the chest as shown in the photo.

Sew the tail between rows 9 and 11

Embroider a line above the eyes as shown in the photo

Cute bunny is ready!

The post Free Little Bunny Amigurumi Pattern appeared first on Amigurumi Patterns.

Materials:

1. Hook No. 1.75

2.Yarn Jeans or Alize Cotton milk color, light yellow (slightly)

3. Yarn Softy yellow (for tummy and tail)

4.Eye eyes on a secure attachment 10mm

5.Plastic nose

6.Glue Gel Moment

7 filler

8.Sewing needle

9 satin ribbon for decoration

1.Head:

1.6sc into magic ring

2.6İNC (12)

3. (sc, İNC) * 6 (18)

4. (2sc, İNC) * 6 (24)

5. (3sc, İNC) * 6 (30)

6. (4sc, İNC) * 6 (36)

7. (5sc, İNC) * 6 (42)

8. (6sc, İNC) * 6 (48)

9. (7sc, İNC) * 6 (54)

10. (8sc, İNC) * 6 (60)

11. (9sc, İNC) * 6 (66)

12. -23. 66sc (12 rows) Insert eyes between rows 16 and 17.

24. (9sc, DEC) * 6 (60)

25. (8sc, DEC) * 6 (54)

26. (7sc, DEC) * 6 (48)

27. (6sc, DEC) * 6 (42)

28. (5sc, DEC) * 6 (36)

29. (4sc, DEC) * 6 (30)

30. (3sc, DEC) * 6 (24) We fill the head quite tightly.

31. (2sc, DEC) * 6 (18)

32. (sc, DEC) * 6 (12) We fill the head to the end.

33.6DEC Pull off hole, leave thread to sew on.

2.Ears (4 pcs):

1. Cast on 20ch, from the second loop from the hook: 18sc, 4sc in the last loop, 17sc, İNC (41)

2.İNC, 8sc, 6hdc, 2dc, 6İNC from dc, 2dc, 6hdc, 8sc, İNC, sc (49)

3.İNC, 9sc, 6hdc, 3dc, (İNC, dc) * 6, dc, 6hdc, 9sc, sl-st (56)

We attach the yellow parts to the milk one and tie them around.

3.Mouth:

1.6sc into magic ring

2.6İNC (12)

3. (sc, İNC) * 6 (18)

4.18sc

Sew on the details of the face to the head.

We glue the nose between the cheeks.

We embroider a mouth with a black thread on the face

(guided by the photo)

4.Legs (2 pcs):

We start knitting the legs in light yellow:

1. cast on 7ch, in the second loop from the hook: İNC, 4 sc, in the last loop 4sc, 4sc, İNC. (16)

2.İNC, 5sc, 4İNC, 5sc, İNC (22)

3.sc, İNC, 5sc, (sc, İNC) * 4,6sc, İNC (28)

4.sc, İNC, 8sc, (İNC, 2sc) * 4,6sc (33)

Change the color to milky:

5.-7.33sc (3 rows)

8.11sc, 6DEC, 10sc (27)

9.8sc, 6DEC, 7sc (21)

10.8sc, 2DEC, 7sc (19)

11.-13. 19sc (3 rows)

14.4sc, İNC, 10sc, İNC, 3sc (21)

15.21sc

16.5sc, İNC, 11sc, İNC, 3sc (23)

17.23sc

18.7sc, İNC, 10sc, İNC, 4sc (25)

19.25sc

20.sc, İNC, 13sc, İNC, 9sc (27)

21.-22.27sc We fill the legs.

We do not tie one loop at the second leg in order to evenly attach the legs to each other.

Having tied the second leg, we do not cut the thread, we continue to knit the body.

5. Torso:

We connect the legs together and continue to knit:

1.2ch, join the right leg, along the right leg: 27sc, 2sc along the chain, along the left leg: 27sc, 2sc along the chain (58)

2.58sc

3.14sc, İNC, (13sc, İNC) * 2.15sc (61)

4.-10. 61sc (7 rows)

11. (18sc, DEC) * 2.19sc, DEC (58)

12.58sc

13.15sc, DEC, 26sc, DEC, 13sc (56)

14.13sc, DEC, 29sc, DEC, 10sc (54)

15.54sc

16. (7sc, DEC) * 6 (48)

17.48sc

18. (6sc, DEC) * 6 (42)

19.42sc

20. (5sc, DEC) * 6 (36)

21.-22.36sc (2 rows)

23. (4sc, DEC) * 6 (30)

24.-26. 30sc (3 rows)

27. (3sc, DEC) * 6 (24)

28. -29.24sc Fill the torso, sew the head to the torso.

Tie a round piece with Softy’s yarn and sew it to the tummy, embroider the rays with the same thread.

6.Handles (2pcs):

1.6sc into magic ring

2.6İNC (12)

3. (sc, İNC) * 6 (18)

4. (2sc, İNC) * 6 (24)

5.-7.24sc (3 rows)

8. (2sc, DEC) * 6 (18)

9.-11.18sc (3 rows)

12. (DEC, 7sc) * 2 (16)

13.-17.16sc (5 rows)

18. (DEC, 6sc) * 2 (14)

19.-25. 14sc (7 rows)

Fold up the knitting and tie on both sides of the 7sc.

Fasten the thread and leave the end for sewing.

Sew the handles to the body.

7.Description:

We make a pom-pom from the Softy thread If you do not have a special tool for making pom poms, you can use the good old method. To do this, cut out two circles of the required diameter from cardboard, make a hole inside the circles.

Insert yarn into the needle and wind it around the workpiece, passing the needle inside the circle. After there is enough yarn, spread the cardboard boxes and tie a strong knot between them, after cutting the threads.

Sew all the details, sew the tail to the butt.

Sunny Bunny is ready !!!

The post Amigurumi Sunny Bunny Free Pattern appeared first on Amigurumi Patterns.